Read instructions in eap.conf. You most likely need to set: use_tunneled_reply = yes
in peap section. Ivan Kalik Kalik Informatika ISP Dana 18/9/2007, "Terry Pelley" <[EMAIL PROTECTED]> piše: >FreeRADIUS Version 1.1.3-r0.1.2 (Upgrade to 1.1.7 is Pending) > > >I am running FreeRADIUS to authenticate wireless users on a bunch of Cisco >AP1231's. My wireless supplicants are running a combination of the >standard Windows XP client which works fine and the Intel Proset Client >which is causing problems. > >The Radius setup is for PEAP/MSChapv2 and each user has the following >attributes assigned. > >Tunnel-Type = "VLAN" >Tunnel-Medium-Type = "IEEE-802" >Tunnel-Private-Group-ID = "X" (Where X is the assigned VLAN Number) > >The Proset Clients do manage to eventually authenticate, but the above >attributes do not appear to get processed. I think this is happening >because the Proset Client sends the User-Name as "anonymous" and as there >is no "anonymous" user defined, the attributes do not get applied. > >How do I get the User-Name to be sent correctly? > >Thanks in advance. > > >Terry Pelley >Network Analyst >Business and Learning Technologies >Ottawa-Carleton District School Board > >[EMAIL PROTECTED] > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html