Hello,
While I resolved my previous issue with radiusd segfaulting, I'm now
running in to a new issue.
I'm attempting to have my Linksys WRT54GL (running DD-WRT v23 SP2) use
WPA RADIUS against a FreeRADIUS server (FreeRADIUS Version 1.1.7, for
host i686-pc-linux-gnu) and subsequently have the FreeRADIUS server use
our existing LDAP directory (OpenLDAP v2.2.13-4).
When a user tries to connect to the access point and the access point
contacts the radius server, the following happens:
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.42.23:2050, id=0,
length=129
User-Name = "rpugatch"
NAS-IP-Address = 192.168.42.23
Called-Station-Id = "0018f8c16a5a"
Calling-Station-Id = "0017f2e7032a"
NAS-Identifier = "0018f8c16a5a"
NAS-Port = 14
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0200000d017270756761746368
Message-Authenticator = 0xe1b0b05b118ebe49d6b79b7569de75b1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
rlm_ldap: - authorize
rlm_ldap: Attribute "User-Name" is required for authentication.
modcall[authorize]: module "ldap" returns invalid for request 0
modcall: leaving group authorize (returns invalid) for request 0
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
This is most likely an issue with my configuration, however, I'm not
sure what the issue is. I'd appreciate any help I can get.
Thanks,
Ryan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
