That's not standard radius but VSA teritory. You can dynamically assign filtering (firewall) type ACL on Mikrotik but not rate-limiting (shaping) ones. Queue definition will accept multiple source addresses (sort of an IP address list - it will take more than one, but how many ...).
Ivan Kalik Kalik Informatika ISP Dana 16/11/2007, "Matthew Neumark" <[EMAIL PROTECTED]> piše: >Ivan, > >I wish that was a option, but the problem is all my customers already have >ip addresses assigned to them. The ip addresses aren't done by the packet >they order it was done based upon when they signed up. Is there a way to do >a dynamic priority based on per user basis? Like a group setting or address >list group? > >Thank You, >Matt > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of >[EMAIL PROTECTED] >Sent: Friday, November 16, 2007 3:26 PM >To: freeradius-users@lists.freeradius.org >Subject: Re: Mikrotik and PPPoE queue prioirties > >Assign that priority to a queue for [an IP address | a subnet]. Assign >the user [that static IP address | to the pool with addresses from that >subnet]. > >Ivan Kalik >Kalik Informatika ISP > > >Dana 16/11/2007, "Matthew Neumark" <[EMAIL PROTECTED]> piše: > >>Hello, >> >> >> >>I use PPPoE connections through freeradius and mikrotik. What I would like >>to do is setup the customer's dynamic queue that is setup through the >>radgroupreply table setup so that when the customers log in I can also >>assign that queue to a priority based upon the group the customer is put >in. >>Is this possible and how? >> >> >> >>Matt >> >> >> > >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html