There is an entry in users file setting Auth-Type System. Comment it out. Ivan Kalik Kalik Informatika ISP
Dana 19/11/2007, "Paolo Serafino Via" <[EMAIL PROTECTED]> piše: > >my authorize section has "files" entry too...sorry for this lack.... > >ok i've used freeradius -X it seems to give me other info...but still >problems to understand: >why gives me an error on processing password using Auth-Type := System, >i'have no entry with that! > >here is the flow for this request: > >rad_recv: Access-Request packet from host 192.168.1.159:1026, id=2, >length=208 > NAS-Port-Type = Wireless-802.11 > Calling-Station-Id = "00:15:00:4A:1E:DB" > Called-Station-Id = "hotspot1" > NAS-Port-Id = "wlan1" > User-Name = "paolo" > NAS-Port = 2159017987 > Acct-Session-Id = "80b00003" > Framed-IP-Address = 172.20.20.126 > Mikrotik-Attr-10 = 0xac14147e > CHAP-Challenge = 0x693b0be4addb3334aa2f339ffdf81223 > CHAP-Password = 0x5d5b150a3b83260c74b7a73469f21de54f > Service-Type = Login-User > WISPr-Logoff-URL = "http://172.20.20.1/logout" > NAS-Identifier = "HOTTEST" > NAS-IP-Address = 192.168.1.159 > Mikrotik-Realm = "novara" > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 2 > modcall[authorize]: module "preprocess" returns ok for request 2 > rlm_realm: No '@' in User-Name = "paolo", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 2 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 2 > users: Matched entry DEFAULT at line 152 > users: Matched entry DEFAULT at line 202 > modcall[authorize]: module "files" returns ok for request 2 >modcall: leaving group authorize (returns ok) for request 2 > Found Autz-Type no > Processing the authorize section of radiusd.conf >modcall: entering group no for request 2 >radius_xlat: 'paolo' >rlm_sql (no): sql_set_user escaped user --> 'paolo' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = 'paolo' ORDER BY id' >rlm_sql (no): Reserving sql socket id: 1 >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radcheck WHERE Username = 'paolo' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op >FROM radgroupcheck,usergroup WHERE usergroup.Username = 'paolo' AND >usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op >FROM radgroupcheck,usergroup WHERE usergroup.Username = 'paolo' AND >usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = 'paolo' ORDER BY id' >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radreply WHERE Username = 'paolo' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op >FROM radgroupreply,usergroup WHERE usergroup.Username = 'paolo' AND >usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op >FROM radgroupreply,usergroup WHERE usergroup.Username = 'paolo' AND >usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (no): Released sql socket id: 1 > modcall[authorize]: module "no" returns ok for request 2 >modcall: leaving group no (returns ok) for request 2 > rad_check_password: Found Auth-Type System >auth: type "System" > ERROR: Unknown value specified for Auth-Type. Cannot perform requested >action. >auth: Failed to validate the user. >Login incorrect: [paolo] (from client HOTTEST port 2159017987 cli >00:15:00:4A:1E:DB) >Delaying request 2 for 1 seconds >Finished request 2 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >rad_recv: Access-Request packet from host 192.168.1.159:1026, id=2, >length=208 >Sending Access-Reject of id 2 to 192.168.1.159 port 1026 >--- Walking the entire request list --- >Waking up in 5 seconds... >--- Walking the entire request list --- >Cleaning up request 2 ID 2 with timestamp 47418827 >Nothing to do. Sleeping until we see a request. > >-- >View this message in context: >http://www.nabble.com/AAA-Services-with-multiple-SQL-tf4835226.html#a13835831 >Sent from the FreeRadius - User mailing list archive at Nabble.com. > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html