I installed FreeRadius 1.1.2 on FreeBSD 6.0. I followed the HOWTO from http://tldp.org/HOWTO/8021X-HOWTO/freeradius.html to configure the server. When I ran radtest, it show the message like this:
Sending Access-Request of id 153 to 10.1.1.3 port 1645 User-Name = "[EMAIL PROTECTED]" User-Password = "sni" NAS-IP-Address = 255.255.255.255 NAS-Port = 1645 rad_recv: Access-Accept packet from host 10.1.1.3:1645, id=153, length=20 or Sending Access-Request of id 153 to 10.1.1.3 port 1645 User-Name = "user" User-Password = "sni" NAS-IP-Address = 255.255.255.255 NAS-Port = 1645 rad_recv: Access-Accept packet from host 10.1.1.3:1645, id=153, length=20 The user 'user' already registered inside /etc/password: user:*:1006:1006:user_radius_sisni:/home/user:/usr/sbin/nologin In radius.conf , proxy_request is set to No. And the $INCLUDE ${confdir}/proxy.conf is already commented. But I still got this message: rlm_realm: Proxy reply, or no User-Name. Ignoring. This is the content from huntgroup file: LNS-KPU-SM2 NAS-IP-Address == 10.1.1.0 This is the content from hints file DEFAULT Suffix == "@sisni", Strip-User-Name = Yes Hint = "sisni", If I tried to dial the Radius from Windows terminal, it always give me an error like this: *Error 691*: Access was denied because the user name and/or password was invalid on the domain Please help me to fix the error. Thank you. -Pungki Here is the last message in /var/log/radacct/10.1.1.0/detail-20071203 Acct-Status-Type = Accounting-On NAS-IP-Address = 10.1.1.0 NAS-Identifier = "LNS-KPU-SM2" Acct-Authentic = RADIUS Acct-Session-Id = "load:2147484043" Event-Timestamp = "Nov 22 2007 10:25:47 WIT" Acct-Delay-Time = 957324 Client-IP-Address = 10.1.1.0 Timestamp = 1196662186 Here is the message that show after radiusd -X command. Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/var" main: logdir = "/var/log" main: libdir = "/usr/local/lib" main: radacctdir = "/var/log/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "/etc/passwd" unix: shadow = "/etc/shadow" unix: group = "/etc/group" unix: radwtmp = "/var/log/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5 eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1645 Listening on accounting *:1646 Ready to process requests. rad_recv: Accounting-Request packet from host 10.1.1.0:50016, id=223, length=80 Acct-Status-Type = Accounting-On NAS-IP-Address = 10.1.1.0 NAS-Identifier = "LNS-KPU-SM2" Acct-Authentic = RADIUS Acct-Session-Id = "load:2147484043" Event-Timestamp = "Nov 22 2007 10:25:47 WIT" Acct-Delay-Time = 952314 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 0 modcall[preacct]: module "preprocess" returns noop for request 0 rlm_realm: Proxy reply, or no User-Name. Ignoring. modcall[preacct]: module "suffix" returns noop for request 0 modcall: leaving group preacct (returns noop) for request 0 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 0 radius_xlat: '/var/log/radacct/10.1.1.0/detail-20071203' rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.1.1.0/detail-20071203 modcall[accounting]: module "detail" returns ok for request 0 modcall[accounting]: module "unix" returns noop for request 0 radius_xlat: '/var/log/radutmp' rlm_radutmp: NAS callback restarted (Accounting-On packet seen) modcall[accounting]: module "radutmp" returns ok for request 0 modcall: leaving group accounting (returns ok) for request 0 Sending Accounting-Response of id 223 to 10.1.1.0 port 50016 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Accounting-Request packet from host 10.1.1.0:50016, id=224, length=80 Acct-Status-Type = Accounting-On NAS-IP-Address = 10.1.1.0 NAS-Identifier = "LNS-KPU-SM2" Acct-Authentic = RADIUS Acct-Session-Id = "load:2147484043" Event-Timestamp = "Nov 22 2007 10:25:47 WIT" Acct-Delay-Time = 952317 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 1 modcall[preacct]: module "preprocess" returns noop for request 1 rlm_realm: Proxy reply, or no User-Name. Ignoring. modcall[preacct]: module "suffix" returns noop for request 1 modcall: leaving group preacct (returns noop) for request 1 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 1 radius_xlat: '/var/log/radacct/10.1.1.0/detail-20071203' rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.1.1.0/detail-20071203 modcall[accounting]: module "detail" returns ok for request 1 modcall[accounting]: module "unix" returns noop for request 1 radius_xlat: '/var/log/radutmp' rlm_radutmp: NAS callback restarted (Accounting-On packet seen) modcall[accounting]: module "radutmp" returns ok for request 1 modcall: leaving group accounting (returns ok) for request 1 Sending Accounting-Response of id 224 to 10.1.1.0 port 50016 Finished request 1 Going to the next request --- Walking the entire request list ---
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html