Thanks, What I ment with radreply, is the fact, that when the MAC user is authentificated by RADIUS, Radius should send for example bandwith values. So I need to have those some-mac-address Attribute Op Value in radreply table. Am I wrong?
All is want to achieve is: I would like to have Abo-Users (time limitation for one month), with a specified bandwidth parameters. The thing is that users can have more computers. That is why I would like to authenticate those computers with MAC, but they should work simultanously using together specified bandwidth. (there is a simultanous option :) ) Practically: one billing user with specified bandwidth, but with no computer limitation, and with no user/password authentification at the same time. Only for real hotspot users, there will be a user and password. But it will be handled by another NAS. Everything will work with the use of Mikrotik routers :) Any other possibilities to solve that problem? :) Best regards, CoMeC On Wed, 12 Dec 2007 14:17:10 +0100, <[EMAIL PROTECTED]> wrote: > No, radcheck. > > 1. Enable mac auth in hotspot profile (login-by=mac) - mac address will > be checked first, if there is no match user will be sent to the login > form > > 2. For mac addresses make such entries in radcheck: > > UserName Attribute Op Value > some-mac-address Auth-Type := Accept > > 3. For users make stanard radcheck entries: > > UserName Attribute Op Value > someuser Cleartext-Password := somepass > > Ivan Kalik > Kalik Informatika ISP > > > Dana 12/12/2007, "CoMeC" <[EMAIL PROTECTED]> piše: > >>Ok, >> >>thanks, >> >>so in radreply I have to use: >> >>some-mac-address Attribute Op Value >> >>? >> >> >>Thx, >> >>CoMeC >> >> >>On Wed, 12 Dec 2007 13:17:41 +0100, <[EMAIL PROTECTED]> wrote: >>> MAC address in mac auth is sent as User-Name not Calling-Station-Id. >>> >>> So, for mac auth: >>> >>> some-mac-add-ress Auth-Type := Accept >>> >>> For a user: >>> >>> username Clertext-Password := "hispassword" >>> >>> Ivan Kalik >>> Kalik Informatika ISP >>> >>> >>> Dana 12/12/2007, "CoMeC" <[EMAIL PROTECTED]> piĹĄe: >>> >>>>Hi, >>>> >>>>I try to configure such a solution: >>>> >>>>Authorization via MAC Address (with no username required) - if the >>> machine >>>>is using a valid IP Address, it is automatically allowed to surf. >>>>(I know there is a Calling-Station-id attribute in radcheck) >>>> >>>> >>>>But I need also a support for username/password authentification (via >>> WWW) >>>>too. >>>> >>>>When I try to log in only with MAC, I get a Radius responce "no >>> username", >>>>and the machine is denied. >>>> >>>>How/where in radiusd.conf can I make changes? >>>> >>>>Thx in advance, >>>> >>>>Best regards, >>>> >>>>CoMeC >>>> >>>>- >>>>List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >>>> >>>> >>> >>> - >>> List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >> >>- >>List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html