2007/12/18, Alan DeKok <[EMAIL PROTECTED]>:
>
> Gianni Socionovo wrote:
> > I set up a free radius server (IP 10.1.1.1) and i
> > checked that is on.
> > I set up a wireless access point (D-LINK DLW3200 AP, IP 10.1.1.2)
> > with wpa2-enterprise authentication settings.
> > In the screen of DWL authentication setting i set 10.1.1.1 as
> > radius server and "radiussecret" as Radius Secret.
> > In freeradius configuration file clients.conf i added the following:
> >
> > client
> > 10.1.1.2 {
>
> Is it really on two lines like that? If so, why?
No in clients.conf all is only in one line.
...
> > I lauched the command:
> >
> > radtest test testpwd
> > 10.1.1.2 0 radiussecret and i got the following message:
> >
> > radclient: no response from server for ID xx.
>
> Is the RADIUS server *running*? Have you tried starting it from the
> command-line in debugging mode, as suggested in the README, FAQ,
> INSTALL, and daily on this list?
I launched radiu server with command freeradius -XXX -A and i got no
errors.
Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
