Hi, I'm trying to migrate our old livingston radius (from around '96) user-file to a newly installed freeradius 1.1.7 server.
Our general setup is, that dialing in with user should rlogin the user to a shell-server. If the username is prefixed by a P, a PPP-Session should be started. Reading the docs, this setup should be pretty straight-forward, using the hints file. Unfortunately, it does not really work as expected. The hints file contains the following lines, which seem to at least somewhat work as the P is stripped and authentication succeeds. DEFAULT Prefix == "P", Strip-User-Name = Yes Hint = "PPP", Service-Type = Framed-User, Framed-Protocol = PPP The users file has users configured with the following structure: user Password == "whatever" Service-Type = Login-User, Login-IP-Host = 192.168.1.1, Login-Service = Rlogin, Port-Limit = 2, Filter-Id = "dialin", Framed-IP-Address = 192.168.2.123 My understanding of the documentation (http://freeradius.org/radiusd/man/users.html) is, that the Service-Type should _not_ be set to Login-User when authenticating as Puser as it has been previously set as configured in the hints file. Unfortunately, this seems to be incorrect. [EMAIL PROTECTED] raddb]# radtest Puser whatever localhost 0 testing123 Sending Access-Request of id 214 to 127.0.0.1 port 1812 User-Name = "Puser" User-Password = "whatever" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=214, length=59 Service-Type = Login-User Login-IP-Host = 192.168.1.1 Login-Service = Rlogin Port-Limit = 2 Filter-Id = "dialin" Framed-IP-Address = 192.168.2.123 Any suggestions how to correctly get the Service-Type set to Framed-User when authenticating as Puser? thx, andreas - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html