That's what I would like to know. I ran freeradius in the debug mode, but I still can't figure out why freeradius is not sending the data back to the ascend data filter.
Don James ----- Original Message ----- From: "Ivan Kalik" <[EMAIL PROTECTED]> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Sent: Saturday, February 02, 2008 2:44 PM Subject: Re: ascend data filters not being returned You havent turned anything on (including the debug). What should match so the user gets this information? Ivan Kalik Kalik Informatika ISP Dana 2/2/2008, "Don James" <[EMAIL PROTECTED]> piše: >Hi, > >When I run radtest, I get the following response: > >Sending Access-Request of id 64 to 192.168.1.41 port 1645 > User-Name = "[EMAIL PROTECTED]" > User-Password = "donjames" > NAS-IP-Address = 255.255.255.255 > NAS-Port = 5 >rad_recv: Access-Accept packet from host 192.168.1.41:1645, id=64, length=20 > >As you can see, the data from the ascend data filters is not being returned. >I suspect that I have somehow turned on encryption. How do I set "plain >text" communication? > >Sincerely, > >Don James >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html