Is the wireless device sending its own mac or the clients mac address?
there's somethimes a bug (CSCsj17603) with the firmware that the CISCO
1200 AP sends his own mac address, in this case you should update you
firmware. For detailed informations read the cisco docs. If it's a
freeradius bug you should post the debug log.
bye
julian
Am 05.02.2008 um 17:30 schrieb John Melton:
Hi,
1200 AP is running c1200-k9w7-mx.123-8.JEB1
-- John
Julian Stöver wrote:
Hello,
which firmware version?
bye
julian
Am 05.02.2008 um 17:05 schrieb John Melton:
I have configured a Cisco 1200 AP for WPA2-PSK which is working
with a wireless device able to connect OK.
I have tried to add MAC authentication using the FreeRadius
server, but have not been able to get it working. I can see from
the FreeRadius log that the AP is sending the Access-Request
packet and an Access-Accept response is being returned but the
wireless device is unable to connect.
Has anyone setup this configuration and got it working?
Regards,
John
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html