Le mercredi 06 février 2008, Alan DeKok a écrit : > Thierry CHICH wrote: > > However, it the accounting is always done with the outer identity > > ... > > > Login OK: [EMAIL PROTECTED]/xxxxxxxx] (from client > > ap-rectorat02 port 0) > > +- entering group post-auth > > expand: %{request.User-Name} -> > > That's a typo. It should be ... "%{request:User-Name}" > > i.e. ':', not '.'.
You are right. I think this typo is in the original file inner-tunnel included in the distrib, but it work better - but not as I want. Now, I have a good Access-Accept packet, but it is seems that the accounting-request following don't care. Snifff. Sending Access-Accept of id 20 to 172.30.87.66 port 4365 User-Name = "[EMAIL PROTECTED]" MS-MPPE-Recv-Key = 0xca8629ba7a784c91e5e5f3bd9c9079e982db2881ce6f7de5d07fa32c07ae3850 MS-MPPE-Send-Key = 0x599f371c29d6ad682cd2a016f834166ec37c4ec1bc105f6a47425fde3b25a253 EAP-Message = 0x03140004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 6. Going to the next request Waking up in 0.8 seconds. rad_recv: Accounting-Request packet from host 172.30.87.66 port 4366, id=144, length=159 Acct-Status-Type = Start Acct-Session-Id = "00186E8FA2C0-000E3571040C-585099434" NAS-IP-Address = 172.30.87.66 Acct-Input-Octets = 0 Acct-Output-Octets = 0 Acct-Input-Packets = 0 Acct-Output-Packets = 0 User-Name = "[EMAIL PROTECTED]" Vendor-Specific = 0x564c414e2049442069733a20333032 Vendor-Specific = 0x61632d636c65726d6f6e742e6672 Acct-Session-Time = 4294967 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html