That is what I am doing, however they append to the current line, I
would like to put a linebreak at the end of each one to make them flow
properly
David
You most likely want operator += to add multiple attributes with the same
name.
http://wiki.freeradius.org/Operators
Ivan Kalik
Kalik Informatika ISP
Dana 20/2/2008, "David W Bell" <[EMAIL PROTECTED]> piše:
yep - tried that :)
Hi David,
Have you tried putting "\n" to see if that puts a line break into the
response? Whether the RADIUS client will barf on that is another
matter ;-)
Rgds,
Guy
On 20/02/2008, David W Bell <[EMAIL PROTECTED]> wrote:
David W Bell wrote:
> Thanks for the info so far.
>
> Is there a howto on getting this to work?
>
> Questions I still have on this are.
>
> 1) Do I need to extend my Schema to include "Cisco-AV-Pair" if so is
> there an example I can copy
>
> 2) What is the exact line that I need to add to my ldap.attrmap file
> to then refer to that
>
> Can this then be expanded to Group Memberships?
>
> The situation I want is for User David, who is a member of the
> Edge_Router group to have full access to the routers for that group,
> while having, say, level 6 access to the core routers from membership
> of the Core_Router group
>
> Thanks for any further help
>
> David
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
Seem to have managed to get a bit further.
Is there any way of adding a line-break to a Radius-Reply string?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
