Thanks for the response. My apologies, it was a typo when I wrote "authorize". I meant "authenticate" in that paragraph. The ntlm_auth entry is already located inside the authentication section of the sites-available/default file. I should have included that file initially, but was a little pressed for space due to the size constraints on the mailing list. I will include it in this response if it will help. Perhaps I am not entering the information correctly. In the file, you can see the 3 different methods I used to try to implement the authentication.
I have already tried removing the "Auth-Type" attributes from the entries in my users file, and as far as I can tell, exec was already instantiated in my current configs. So with this suggestion, I am back to "No authenticate method (Auth-Type) configuration found for the request", and the request is rejected. Again, thanks for the assistance. I hope I am just making some sort of simple mistake somewhere in the configs. Respectfully, Charles Jones On Thu, Apr 3, 2008 at 9:07 AM, Ivan Kalik <[EMAIL PROTECTED]> wrote: > >Next, I decided to try a different Auth-Type. However, anytime I try > >to provide an alternative Auth-Type, FR refuses to start with "Unknown > >value for <insert Auth-Type of choice here> for attribute Auth-Type". > >I have specifically tried to use ntlm_auth because that would be my > >preferred method of authentication between FR and AD. When I > >attempted to use ntlm_auth as the Auth-Type, I received the "Unknown > >Value" message. I also tried adding an entry for it in the > >sites_available/default file under the "authorize" section to see if > >that helped. I received the same error. Next, I tried adding it to > >the "instantiate" section just out of curiosity, and received a new > >error stating "Cannot find a configuration entry for module > >ntlm_auth". > > > > Don't set Auth-Type. Add ntlm_auth to authenticate not authorize > section. And instantiate exec module. > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
default
Description: Binary data
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html