Doesn't acct_unique come after ? When the server sees a Access-request without NAS-Port, it simply gives the result I indicated in my previous mail.
Then comes a problem of clearing the IP address when Accounting-Stop message is received.. I tried changing acct_unique by replacing NAS-Port by Calling-Station-Id without any success. 2008/4/22 Ivan Kalik <[EMAIL PROTECTED]>: > Have a look at acct_unique in radiusd.conf and adjust accordingly. > > Ivan Kalik > Kalik Informatika ISP > > > Dana 22/4/2008, "rsg" <[EMAIL PROTECTED]> piše: > > > > >When there's no NAS-Port in rad_request... the server doesn't assign > >an IP address; That's why in my opinion there's no Framed-IP-Address > >in Access-Accept message. > > > >If my reasoning is correct, I'd like to highlight that NAS-Port is not > >a mandatory attribute when it comes to Mobile telephony environment. > > > >Is there any workaround once again to bypass this. I can suggest > >one..i.e to update the Access-Request using unlang and hope it would > >work. > > > > > >auth: type Local > >auth: user supplied User-Password matches local User-Password > >Login OK: [test/test] (from client SSS port 0 cli 44444444488) > >+- entering group post-auth > >rlm_sqlippool: unknown NAS-Port > >++[sqlippool] returns noop > >} # server example > >Sending Access-Accept of id 56 to 192.168.1.4 port 1812 > > Primary-DNS-Server = 192.168.2.2 > > Secondary-DNS-Server = 192.168.2.2 > > Proxy-State = 0x30303338 > >Finished request 0. > >- > >List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html