>May it be the problem from the radius client, or is it the problem in my >perl code. >I can't rectify the problem, I am confusing where should I emphasized > >Here is the new output when it is run in radiusd -X after rejecting da >user. > >rad_recv: Access-Request packet from host 192.168.1.227 port 32847, id=182, >length=252 > User-Name = "[EMAIL PROTECTED]" > X-Ascend-Netware-timeout = 1785686126 > X-Ascend-Send-Secret = 0x3139322e3136382e312e323237 > X-Ascend-Receive-Secret = >0x34383161663338653534346236663063383862343865393864346639313036626264363230306536 > X-Ascend-IP-Pool-Definition = "sip:192.168.1.227" > X-Ascend-IPX-Peer-Mode = 0x5245474953544552 > Digest-Response = "1e926599fa0777bef89010421e3e1c41" > Service-Type = IAPP-Register > X-Ascend-PW-Lifetime = 1785686126 > Cisco-AVPair = "call-id= >[EMAIL PROTECTED]" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 5060
Your radius client is not sending Digest-Attributes. It's sending Ascend VSAs. Read your NAS documentation how to set up digest authentication if you want that. Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html