>You are asking your questions on a wrong list. There is nothing you can >do on a radius server in order to get those attributes if radius client >is not sending Digest-Attributes. Direct your question to SER server >support.
hi Kalik, After I've done some changes in dictionary of radius server I can see the output sending digest attributes from the client, but still i didn't get the values at the radius server. Is it the problem of my configuration of radius server or it may be some other client configuration. Please advice, sorry for posting the same question again. Please tell me the possible problems of not getting these values: 'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri', 'Digest-Nonce', 'Digest-Response' here is the full output when I run in debug mode rad_recv: Access-Request packet from host 192.168.1.227 port 33093, id=86, length=271 User-Name = "[EMAIL PROTECTED]" Digest-Attributes = 0x0a096a6f686e736f6e Digest-Attributes = 0x010f3139322e3136382e312e323237 Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439 Digest-Attributes = 0x04137369703a3139322e3136382e312e323237 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "b8f4759b0c4462aaa56edd1794da872a" Service-Type = Sip-Session Sip-Uri-User = "johnson" Cisco-AVPair = "call-id= [EMAIL PROTECTED]" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 +- entering group authorize ++[preprocess] returns ok perl_pool: item 0x89260f0 asigned new request. Handled so far: 1 found interpetator at address 0x89260f0 rlm_perl: ############################################################### rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a rlm_perl: RAD_REQUEST: Service-Type = Sip-Session rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id= [EMAIL PROTECTED] rlm_perl: RAD_REQUEST: User-Name = [EMAIL PROTECTED] rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1 rlm_perl: RAD_REQUEST: NAS-Port = 5060 rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x89dd638) rlm_perl: ############################################################### rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a rlm_perl: Added pair Service-Type = Sip-Session rlm_perl: Added pair Cisco-AVPair = call-id= [EMAIL PROTECTED] rlm_perl: Added pair User-Name = [EMAIL PROTECTED] rlm_perl: Added pair Sip-Uri-User = johnson rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair NAS-Port = 5060 rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237 rlm_perl: Added pair Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439 rlm_perl: Added pair Digest-Attributes = 0x04137369703a3139322e3136382e312e323237 rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552 rlm_perl: Added pair Reply-Message = Incorrect Password perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x89260f0 ++[perl] returns reject Invalid user: [EMAIL PROTECTED]/<no User-Password attribute>] (from client 192.168.1.227 port 5060) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> [EMAIL PROTECTED] attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.227 port 33094, id=87, length=271 User-Name = "[EMAIL PROTECTED]" Digest-Attributes = 0x0a096a6f686e736f6e Digest-Attributes = 0x010f3139322e3136382e312e323237 Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439 Digest-Attributes = 0x04137369703a3139322e3136382e312e323237 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "b8f4759b0c4462aaa56edd1794da872a" Service-Type = Sip-Session Sip-Uri-User = "johnson" Cisco-AVPair = "call-id= [EMAIL PROTECTED]" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 +- entering group authorize ++[preprocess] returns ok perl_pool: item 0x8a20548 asigned new request. Handled so far: 1 found interpetator at address 0x8a20548 rlm_perl: ############################################################### rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a rlm_perl: RAD_REQUEST: Service-Type = Sip-Session rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id= [EMAIL PROTECTED] rlm_perl: RAD_REQUEST: User-Name = [EMAIL PROTECTED] rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1 rlm_perl: RAD_REQUEST: NAS-Port = 5060 rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x8ab7bd0) rlm_perl: ############################################################### rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a rlm_perl: Added pair Service-Type = Sip-Session rlm_perl: Added pair Cisco-AVPair = call-id= [EMAIL PROTECTED] rlm_perl: Added pair User-Name = [EMAIL PROTECTED] rlm_perl: Added pair Sip-Uri-User = johnson rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair NAS-Port = 5060 rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237 rlm_perl: Added pair Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439 rlm_perl: Added pair Digest-Attributes = 0x04137369703a3139322e3136382e312e323237 rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552 rlm_perl: Added pair Reply-Message = Incorrect Password perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x8a20548 ++[perl] returns reject Invalid user: [EMAIL PROTECTED]/<no User-Password attribute>] (from client 192.168.1.227 port 5060) Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> [EMAIL PROTECTED] attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.4 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 86 to 192.168.1.227 port 33093 Reply-Message = "Incorrect Password" Waking up in 0.4 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 87 to 192.168.1.227 port 33094 Reply-Message = "Incorrect Password" Waking up in 4.5 seconds. Cleaning up request 2 ID 86 with timestamp +9 Waking up in 0.4 seconds. Cleaning up request 3 ID 87 with timestamp +10 Ready to process requests. Thanks and Regards Elangbam Johnson
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html