Yes Phil, that is the unfortunate configuration I have inherited with the job. This is a school district, they really want to keep each school building as it's own top-level O. I work in the ESB building, so that was the baseDN I used for testing. I'd rather not have to run 6 different radius boxes, but I can't seem to figure out how to make the multiple ldap modules work. I found a few how-to's on the web, but they are for the 1.x version and they don't seem to work with the 2.x version.
-Rob >>> Phil Mayers <[EMAIL PROTECTED]> 5/9/2008 7:09 AM >>> Rob VanDusen wrote: > I'm very new to both Linux and FreeRadius, so please excuse me if > this is too easy a question. After a couple weeks of fighting, > reading, testing and reconfiguring - I finally managed to get > FreeRadius 2.x working with my Novell eDirectory. Right now my eDir > tree is made up of 6 "O's" - one for each building in the > organization. It looks something like this: > > ISDTREE | CTC | ESB | MTC | SPS | OAC | JSC Sorry, that's a bit confusing; are you saying you don't have a common top-level O or OU That is, is the current basedn: o=esb ? If so, you've got problems (and if I may say so, that's a rather unwise configuration) > > My current config will check via LDAP against a NetWare box and > authorize anyone in the ESB container - but I can't get it to look at > any of the other containers. I tried doing multiple instances of the > LDAP module - but that resulted in the server not authorizing anyone. http://wiki.freeradius.org/index.php/FAQ#It_still_doesn.27t_work.21 > How would I set this up so I can add the other O's as Base DN's? I'd > really appreciate any instructions that a slightly dim bulb could > follow. > > -Rob - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html