rad_recv: Access-Request packet from host 127.0.0.1:46636, id=35, length=58 User-Name = "proba1" User-Password = "\210\363\353\036\337S\342i\023c&\212\240\267\350\026" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "proba1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 modcall[authorize]: module "files" returns notfound for request 0 radius_xlat: 'proba1' rlm_sql (sql): sql_set_user escaped user --> 'proba1' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'proba1' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'proba1' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'proba1' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'proba1' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 3 rlm_sql (sql): No matching entry in the database for request from user [proba1] modcall[authorize]: module "sql" returns notfound for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [proba1/\210\363\353\036\337S\342i\023c&\212\240\267\350\026] (from client localhost port 2) WARNING: Unprintable characters in the password. ? Double-check the shared secret on the server and the NAS!
There it is at the end. This is 1.1.7 built from the source. Ivan Kalik Kalik Informatika ISP Dana 14/5/2008, "niall el-assaad" <[EMAIL PROTECTED]> piše: >Its 1.1.7 (actually 1.1.7-3.1.fc6) >thanks, > >2008/5/14 Ivan Kalik <[EMAIL PROTECTED]>: > >> freeradius version? >> >> Ivan Kalik >> Kalik Informatika ISP >> >> >> Dana 14/5/2008, "niall el-assaad" <[EMAIL PROTECTED]> piše: >> >> >Yes capital X as in -X >> >thanks, >> > >> >2008/5/14 Ivan Kalik <[EMAIL PROTECTED]>: >> > >> >> Are you using -X (capital X) or something else? >> >> >> >> Ivan Kalik >> >> Kalik Informatika ISP >> >> >> >> >> >> Dana 13/5/2008, "niall el-assaad" <[EMAIL PROTECTED]> piše: >> >> >> >> >Thanks Ivan, >> >> >I don't have this message in the debug output, is this possibly >> because >> >> I'm >> >> >running an external script? Or is there a chance that its not a >> >> mismatched >> >> >secret? >> >> > >> >> >thanks, >> >> > >> >> >2008/5/14 Ivan Kalik <[EMAIL PROTECTED]>: >> >> > >> >> >> Threre is a "Unprintable characters ..." warning about the potential >> >> >> shared secret mismatch in the debug. >> >> >> >> >> >> Ivan Kalik >> >> >> Kalik Informatika ISP >> >> >> >> >> >> >> >> >> Dana 13/5/2008, "niall el-assaad" <[EMAIL PROTECTED]> piše: >> >> >> >> >> >> >thanks alan, much appreciated. >> >> >> >I think you may be right. Its just strange the FR server doesn't >> >> mention >> >> >> >this - or would it not know and only the radius client know this? >> >> >> > >> >> >> >thanks again, >> >> >> > >> >> >> >On Tue, May 13, 2008 at 10:02 PM, <[EMAIL PROTECTED]> wrote: >> >> >> > >> >> >> >> hi, >> >> >> >> >> >> >> >> incorrect shared secret between FR server and WLC? >> >> >> >> >> >> >> >> alan >> >> >> >> - >> >> >> >> List info/subscribe/unsubscribe? See >> >> >> >> http://www.freeradius.org/list/users.html >> >> >> >> >> >> >> > >> >> >> > >> >> >> >> >> >> - >> >> >> List info/subscribe/unsubscribe? See >> >> >> http://www.freeradius.org/list/users.html >> >> >> >> >> > >> >> >> >> - >> >> List info/subscribe/unsubscribe? See >> >> http://www.freeradius.org/list/users.html >> >> >> > >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html