Thanks ofr your reponse Alan. Here is the other error message....
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [bob/<no User-Password attribute>] (from client myhost port 0) PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE Anyhow I will try again with version 2.0.5 Raja Alan DeKok-4 wrote: > > Raja Peer wrote: >> Trying to authenticate login just using "users" file. >> >> And getting the following failure: >> rlm_eap_peap: Received EAP-TLV response. >> rlm_eap_peap: Had sent TLV failure. User was rejected earlier in this >> session. > > That message means you're supposed to read the REST of the debug log > to see where the REAL error is. > >> Copied the whole log of radius server and also attached a single >> file which includes the configurations of eap.conf, clients.conf and >> radiusd.conf > > You're running 2.0.3. It has a bug where the "inner-tunnel" file > isn't installed. Install it, or upgrade to 2.0.5. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > -- View this message in context: http://www.nabble.com/Failing-to-authenticate-using-FreeRadius%28in-OpenBSD%29-%2B-XP-as-a-client-%2B-Cisco-AP-1200-using-peap-tp17957152p17958665.html Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
