David Mitchell wrote: > David Mitchell wrote: >> I'm trying to figure out how to have FreeRadius not send an >> authentication failed response if it can't reach a proxy. What I would >> prefer is that it simply not respond at all. That would allow my NAS to >> fall back to using a local password if my proxy is down or unreachable. >> A quick look at the source to event.c makes it appear that sending the >> reject is hard coded. Is there some way around this that I'm missing? >> Thanks in advance, > > I solved this with the following in radiusd.conf, in case any body else > has the same problem.
This should say it's in sites-enabled/default, not radiusd.conf. Oops. -David Mitchell > > post-proxy { > # If the server tries to proxy a request and the request > # times out, then the > # request is processed through the modules in this section. > # > # 'fail' causes the server to ignore the request, so the NAS > # will fall back to the line/enable/whatever password. > Post-Proxy-Type Fail { > fail > } > > } > >> -David Mitchell >> > > -- ----------------------------------------------------------------- | David Mitchell ([EMAIL PROTECTED]) Network Engineer IV | | Tel: (303) 497-1845 National Center for | | FAX: (303) 497-1818 Atmospheric Research | ----------------------------------------------------------------- - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html