Do you have that Auth-Type defined in the authenticate section? Ivan Kalik Kalik Informatika ISP
Dana 1/7/2008, "Greg Woods" <[EMAIL PROTECTED]> piše: >I am trying to migrate from freeradius 1.1.7 to freeradius 2.0.5 and I >cannot get the OTP module to work. Basically it instantiates, but when I >specify "Auth-Type = OTP" in a users file entry, it complains that this >is not a valid value for that attribute. This worked fine under 1.1.7 . >I have been Googling, grepping the source code and reading the wiki for >a couple of days now without finding anything that directly pertains to >this problem. I don't know if I messed up compiling the code or >configuring the server. If this is documented somewhere, please forgive >me, as I have been unable to find it. > >Here are the relevant snippets from the -X output; the full output is >attached: > >including configuration file /usr/local/etc/raddb/modules/otp >[...] >including configuration file /usr/local/etc/raddb/otp.conf >[...] > Module: Linked to module rlm_otp >Module: Instantiating otp > otp { > otpd_rp = "/var/run/otpd/socket" > challenge_prompt = "Challenge: %s Response: " > challenge_length = 6 > challenge_delay = 30 > allow_sync = yes > allow_async = no > mschapv2_mppe = 2 > mschapv2_mppe_bits = 2 > mschap_mppe = 2 > mschap_mppe_bits = 2 > } > >And then it craps out at the end with: > >/usr/local/etc/raddb/users[4]: Parse error (check) for entry DEFAULT: >Unknown value otp for attribute Auth-Type >Errors reading /usr/local/etc/raddb/users > >The entry that worked under 1.1.7 (and which results in the above error >under 2.0.5) is: > >DEFAULT Auth-Type = OTP > Fall-Through = No > >Thanks for any pointers; I am pretty much dead in the water in my >migration at this point. > >--Greg > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html