Alan: I'll do my best to explain.
Currently our NAS is returning the NAS-Port and FreeRADIUS is logging it like this: Fri Jul 18 13:09:52 2008 : Auth: Login OK: [khj] (from client dslam port 1073873726) Fri Jul 18 13:09:55 2008 : Auth: Login OK: [dfsands6] (from client dslam port 1073873388) Fri Jul 18 13:10:37 2008 : Auth: Login OK: [s44] (from client dslam port 1073742057) According to my NAS' documentation, that longish number is a bit-representation of an interface. Rather than figure out how to call some external module to re-write that value into something that looks like "port #/#/VP/VC", which seems to be more complex, I would like to print the value of "NAS-Port-Id(87) which contains the same information. So, I would like the above output to look like this: Fri Jul 18 13:09:52 2008 : Auth: Login OK: [khj] (from client dslam NAS-Port-ID 2/0/12/313) Fri Jul 18 13:09:55 2008 : Auth: Login OK: [dfsands6] (from client dslam NAS-Port-ID 4/0/6/141) Fri Jul 18 13:10:37 2008 : Auth: Login OK: [s44] (from client dslam port NAS-Port ID 4/0/2/22) The last field is directly from the contents of NAS-Port-Id(87), without any manipulation. ISC's DHCP is very powerful -- in the configuration file you can define what is logged. See: http://marc.info/?l=dhcp-users&m=121369168201304&w=2 for an example. Any ideas? Frank -----Original Message----- From: Alan DeKok [mailto:[EMAIL PROTECTED] Sent: Saturday, July 19, 2008 1:42 AM To: [EMAIL PROTECTED]; FreeRadius users mailing list Subject: Re: Logging attributes to the regular log Frank Bulk wrote: > I scoured online and in the archives but I haven't found a solution to my > question: is there a way to log additional attributes, not unlike what's > done in ISC's DHCP logging? What do you mean by that? > I know that 'detail' logging is possible, but > those are stored in a separate file for each connection. The detail log doesn't store it's logs in a separate file for each connection. If you want that to happen, just configure it in the "detail" module. Make the file name depend on a per-connection attribute. > I just want to add > another parameter that the NAS sends to FreeRADIUS. Is that request related to the previous sentences? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html