take a look at client file. there you can specify which clients ( IP addresses ) are allowed . add the public ip of your outside clients/nas.
2008/8/5 Yoho, Cindy <[EMAIL PROTECTED]>: > Hi All, > > I have freeradius 1.1.7 running on RHEL 5. radtest works with a local > user setup, and also with authentication via Active Directory. However, > anything outside the radius server host does not get a reply. I have > configured a Multitech MA820 and also tried ntradping, and both get the > same results - "Could not receive a response from server" is the message > when I use ntradping, and "Server did not respond in a timely manner" is > the response when I try to connect from the Multitech. > > Is there some setting I need to check to make sure external access is > enabled? > > > Thanks in advance ~ > > Cindy Yoho > Systems Engineer > United Methodist Publishing House > Nashville, TN > > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html