Здравствуйте, FreeRadius!
Вы писали 16 сентября 2008 г., 23:23:13:
> The patch works as promised in version 1.1.3 if applied. The
> post-auth section in radiusd.conf doesn't though.
> As suggested by Michael with Kostas' patch applied you have to pass
> "DEFAULT" as Pool-Name check attribute in 'users'.
>> You should to set Pool-Name to "DEFAULT" in 'users'. like this
>>
>> > DEFAULT Huntgroup-Name == "lns0x", Pool-Name := DEFAULT,
>> > Post-Auth-Type := LNS0X
>> > Fall-Through = Yes
>>
>> > DEFAULT Huntgroup-Name == "lns0y", Pool-Name := DEFAULT,
>> > Post-Auth-Type := LNS0Y
>> > Fall-Through = Yes
> The post-auth section as posted by me does not work:
>> > Post-Auth-Type LNS0X {
>> > redundant {
>> > lns0x-00
>> > lns0x-01
>> > }
>> > }
what about simple:
Post-Auth-Type LNS0X {
lns0x-00
lns0x-01
}
Post-Auth-Type LNS0Y {
lns0y-00
lns0y-01
}
> lns0x-01 is for unknown reasons not called. It has to be:
are lns0x-00 have no free entries?
in my case second pool used only when first does't give free ip.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
