Hello comrades again. I have been presented the following problem and by what I see is a user problem, teachme if I am wrong. The theme is already created certificates and installed on the user as I read in the howto but does not connect to the network. I put all passwords equally by the doubts, which can be wrong?
This is the error log: Ready to process requests. rad_recv: Access-Request packet from host 10.0.31.40 port 1645, id=3, length=128 Framed-MTU = 1400 Called-Station-Id = "0019.2fdb.9e00" Calling-Station-Id = "001f.3c22.44c5" Service-Type = Login-User Message-Authenticator = 0x59eaaf3452a4d4924059fd281add53cd EAP-Message = 0x0202000501 NAS-Port-Type = Wireless-802.11 NAS-Port = 261 NAS-IP-Address = 10.0.31.40 NAS-Identifier = "ap-Reconquista-31" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: Proxy reply, or no User-Name. Ignoring. ++[suffix] returns ok rlm_eap: EAP packet type response id 2 length 5 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: UserIdentity Unknown rlm_eap: Identity Unknown, authentication failed rlm_eap: Failed in handler ++[eap] returns invalid auth: Failed to validate the user. Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> ++[attr_filter.access_reject] returns noop Sending Access-Reject of id 3 to 10.0.31.40 port 1645 Finished request 1. Going to the next request Waking up in 4.9 seconds. Cleaning up request 1 ID 3 with timestamp +115 Ready to process requests.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html