[EMAIL PROTECTED] wrote:
Yes. Your proxy need to be configured as a client on RSA radius server.
And I believe the RADIUS server is disabled on the appliances by
default, at least it was on ours.
Arran
Ivan Kalik
Kalik Informatika ISP
Dana 23/9/2008, "Chris Haskins" <[EMAIL PROTECTED]> piše:
Hello,
My company has purchased several of the RSA Securid appliances to provide
OTP for our environment. The architecture calls for proxying from a
central freeRADIUS server (on RHEL 5) to the RSA Securid appliances.
I am new to the RADIUS protocol (1 week now), but I have my freeRADIUS
setup to proxy all requests to the RSA appliance. Using tethereal, I see
the RADIUS (UDP) packets going to the RSA appliance, but I do not receive
a response.
Another Engineering group is responsible for the RSA appliance setup, so I
have very little insight into the workings of the RADIUS server running on
them. My question is do we setup the central freeRADIUS server as a client
on the RSA appliance, and is there instructions out there (possible from
RSA) on how to accomplish this?
Thank you for your time,
Chris
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Arran Cudbard-Bell ([EMAIL PROTECTED]),
Authentication, Authorisation and Accounting Officer,
Infrastructure Services (IT Services),
E1-1-08, Engineering 1, University Of Sussex, Brighton, BN1 9QT
DDI+FAX: +44 1273 873900 | INT: 3900
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
