Thanks, now it works :)
Now the last step: How can I test it? What tool/program etc. can/should I use to test it? "The radclient cannot currently be used to send this request, unfortunately, which makes testing a little difficult If everything goes well, you should see the server returning an Access-Accept <http://freeradius.org/rfc/rfc2865.html#Access-Accept> message as above." Mit freundlichen Grüßen / Kind regards Frederik Niedernolte ------------------------------------------------------- arvato services An der Autobahn 33310 Gütersloh Germany http://www.arvato-services.de [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Tel.: +49 (0)5241 80-40554 arvato services GmbH: Sitz Gütersloh | Amtsgericht Gütersloh HRB 3826 | Geschäftsführer Ralf Bierfischer, Bodo Krönfeld, Markus Schmedtmann, Eckhard Südmersen Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Syed Anwarul Hasan Gesendet: Donnerstag, 9. Oktober 2008 11:44 An: FreeRadius users mailing list Betreff: Re: Problem with ntlm_auth Hi Frederik, 1) Put User entry on TOP of users file. 2) In default file, in authenticate section, add ntlm_auth. Don't set using Auth-Type. 3) Also in Sites-enabled/inner-tunnel which is Virtual Server Inner Tunnel. Add ntlm_auth in Authenticate Section. I hope it will solve your problem. SYED On Thu, Oct 9, 2008 at 11:17 AM, <[EMAIL PROTECTED]> wrote: I have finished all steps till "user Auth-Type := ntlm_auth" from http://deployingradius.com/documents/configuration/active_directory.html. With this command I get this error message at the end of "/usr/sbin/freeradius -X": /etc/freeradius/users[1]: Parse error (check) for entry MyUser: Unknown value ntlm_auth for attribute Auth-Type Errors reading /etc/freeradius/users /etc/freeradius/modules/files[7]: Instantiation failed for module "files" /etc/freeradius/sites-enabled/inner-tunnel[111]: Failed to find module "files". /etc/freeradius/sites-enabled/inner-tunnel[34]: Errors parsing authorize section. } } Errors initializing modules The authenticate section in the /etc/freeradius/sites-enabled/default looks like this (only important part): authenticate { # # NTML_AUTH authentication. Auth-Type ntlm_auth { ntlm_auth } What is wrong and what can I do to solve the problem? Thanks in advance. Best regards, F. Niedernolte - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
