>Firstly, Thanks for taking time to look at the problems I am facing. > >I have followed your instructions, and set the following in the users file: >DEFAULT Auth-Type = ntlm_auth > >After doing that, I ran radiusd -X >The configuration was fine at the beginning, but as it reaches an abrupt >stop with the following errors in the debug: >/usr/local/etc/raddb/users[1]: Parse error (check) for entry DEFAULT: >Unknown value ntlm_auth for attribute Auth-Type >Errors reading /usr/local/etc/raddb/users >/usr/local/etc/raddb/modules/files[7]: Instantiation failed for module >"files" >/usr/local/etc/raddb/sites-enabled/inner-tunnel[111]: Failed to find module >"files". >/usr/local/etc/raddb/sites-enabled/inner-tunnel[34]: Errors parsing >authorize section. > } >} >Errors initializing modules > >It seems like it require an external ntlm_auth to execute, rather than one >that is embedded in MSCHAP module. >
Well, yes. You said you were following the instructions in http://deployingradius.com/documents/configuration/active_directory.html That's one of the steps. Just add ntlm_auth to authenticate in both virtual servers (default and inner-tunnel). Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html