Ivan, Here where are using freeradius to autenticate from an access point in a wireless network. That is why eap is enable.
El mié, 24-12-2008 a las 15:24 +0100, t...@kalik.net escribió: > >this is the debug for user jvidal and the user didn`t found .... > > > >rad_recv: Access-Request packet from host 192.168.0.2:1035, id=100, > >length=154 > > User-Name = "jvidal" > > NAS-IP-Address = 192.168.0.2 > > NAS-Port = 3 > > Called-Station-Id = "00-1E-2A-3C-D2-90:NETGEAR2" > > Calling-Station-Id = "00-18-4D-66-60-24" > > Framed-MTU = 1400 > > NAS-Port-Type = Wireless-802.11 > > Connect-Info = "CONNECT 54Mbps 802.11g" > > EAP-Message = 0x0200000b016a766964616c > > Message-Authenticator = 0xd245baabd1d9b6ece4c2122fe0b744df > > Processing the authorize section of radiusd.conf > >modcall: entering group authorize for request 0 > > modcall[authorize]: module "preprocess" returns ok for request 0 > > modcall[authorize]: module "chap" returns noop for request 0 > > modcall[authorize]: module "mschap" returns noop for request 0 > > rlm_realm: No '@' in User-Name = "jvidal", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 0 > > rlm_eap: EAP packet type response id 0 length 11 > > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > > modcall[authorize]: module "eap" returns updated for request 0 > >radius_xlat: 'jvidal' > >rlm_sql (sql): sql_set_user escaped user --> 'jvidal' > >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM > >radcheck WHERE Username = 'jvidal' ORDER BY id' > >rlm_sql (sql): Reservingrlm_sql_mysql: query: SELECT id, UserName, > >Attribute, Value, op FROM radcheck WHERE Username = > >'jvidal' ORDER BY id > >radius_xlat: 'SELECT > >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op > > FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jvidal' AND > >usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' > >rlm_sql_mysql: query: SELECT > >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op > > FROM radgroupcheck,usergroup WHERE usergroup.Username = 'jvidal' AND > >usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id > >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM > >radreply WHERE Username = 'jvidal' ORDER BY id' > >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op > >FROM radreply WHERE Username = 'jvidal' ORDER BY id > >radius_xlat: 'SELECT > >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op > > FROM radgroupreply,usergroup WHERE usergroup.Username = 'jvidal' AND > >usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' > >rlm_sql_mysql: query: SELECT > >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op > > FROM radgroupreply,usergroup WHERE usergroup.Username = 'jvidal' AND > >usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id > >rlm_sql (sql): Released sql socket id: 4 > >rlm_sql (sql): No matching entry in the database for request from user > >[jvidal] > > modcall[authorize]: module "sql" returns notfound for request 0 > >modcall: leaving group authorize (returns updated) for request 0 > > rad_check_password: Found Auth-Type EAP > >auth: type "EAP" > > Processing the authenticate section of radiusd.conf > >modcall: entering group authenticate for request 0 > > rlm_eap: EAP Identity > > rlm_eap: processing type tls > > rlm_eap_tls: Initiate > > rlm_eap_tls: Start returned 1 > > modcall[authenticate]: module "eap" returns handled for request 0 > > sql socket id: 4 > >rlm_sql (sql): No matching entry in the database for request from user > >[jvidal] > > modcall[authorize]: module "sql" returns notfound for request 0 > >modcall: leaving group authorize (returns updated) for request 0 > > rad_check_password: Found Auth-Type EAP > >auth: type "EAP" > > Processing the authenticate section of radiusd.conf > >modcall: entering group authenticate for request 0 > > rlm_eap: EAP Identity > > rlm_eap: processing type tls > > rlm_eap_tls: Initiate > > rlm_eap_tls: Start returned 1 > > modcall[authenticate]: module "eap" returns handled for request 0 > >modcall: leaving group authenticate (returns handled) for request 0 > >Sending Access-Challenge of id 100 to 192.168.0.2 port 1035 > > EAP-Message = 0x010100061920 > > Message-Authenticator = 0x00000000000000000000000000000000 > > State = 0x314214bdd05f8421ec27027c7fade7d4 > >Finished request 0 > >Going to the next request > >--- Walking the entire request list --- > >Waking up in 6 seconds... > > > > This debug (that's a problem with certificates explained in FAQ and > eap.conf) doesn't belong to this radius.log output: > > >> >But radius.log is reporting this: > >> > > >> >Tue Dec 23 10:40:44 2008 : Info: rlm_eap_mschapv2: Issuing Challenge > >> >Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the > >> >database for request from user [jvidal] > >> >Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the > >> >database for request from user [jvidal] > >> >Tue Dec 23 10:40:44 2008 : Auth: Login incorrect: [jvidal/<no > >> >User-Password attribute>] (from client radius-server port 0) > >> >Tue Dec 23 10:40:44 2008 : Info: rlm_sql (sql): No matching entry in the > >> >database for request from user [jvidal] > >> >Tue Dec 23 10:40:44 2008 : Auth: Login incorrect: [jvidal/<no > >> >User-Password attribute>] (from client red-Wifi-FCMC1 port 1 cli > >> >00-18-4D-66-60-24) > >> > > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Enrique Acosta Figueredo Adm. de Red en Nodo Infosur, Cfgos, Cuba(Network Administrator at Infosur Node, Cfgos, Cuba) Est modus in rebus Linux User # 301079 http://counter.li.org --------------------------------------- Red Telematica de Salud - Cuba CNICM - Infomed - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html