freeradius 2.1.1, configured to use multiple virtual servers, seems to
select the server to use depending on the host sending the request, not
depending on the NAS-IP-Address in the request.
When using radtest I get:
norb...@suse:~$ radtest 000000000002 000000000002 psucoll 0 secret dummy
1.1.1.1
Sending Access-Request of id 227 to 123.25.153.210 port 1812
User-Name = "000000000002"
User-Password = "000000000002"
NAS-IP-Address = 1.1.1.1
NAS-Port = 0
Framed-Protocol = PPP
rad_recv: Access-Accept packet from host 123.25.153.210 port 1812,
id=227, length=20
while radiusd -X shows
.....
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 149.246.185.169 port 54115,
id=244, length=70
User-Name = "000000000001"
User-Password = "000000000001"
NAS-IP-Address = 1.1.1.1
NAS-Port = 0
Framed-Protocol = PPP
server enterasys {
....
1.1.1.1 is a nas belonging to the server cisco,
149.246.185.169 belongs to the server enterasys.
I would have expected, the server is choosen because of the NAS-IP-Address.
Thanks
Norbert Wegener
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
