Am Freitag, 13. Februar 2009 11:54:29 schrieb Paul Dealy: > On Fri, Feb 13, 2009 at 9:12 PM, Michael Schwartzkopff > > <mi...@multinet.de> wrote: > > Am Freitag, 13. Februar 2009 11:00:10 schrieb Paul Dealy: > >> On Fri, Feb 13, 2009 at 6:37 PM, Michael Schwartzkopff > >> > >> <mi...@multinet.de> wrote: > >> > Am Freitag, 13. Februar 2009 07:17:17 schrieb Paul Dealy: > >> >> I have a working radius server (ver 1.1.3). which I am using for > >> >> 802.1x authentication of wired switch ports. I would like to > >> >> dynamically assign users vlans. I have cisco gear and have achieved > >> >> basic vlan allocation by configuring a Default entry in the users > >> >> file. So the vlan allocation part works ok. > >> >> > >> >> What I want to be able to do is allocate the vlan by matching the > >> >> value of an LDAP attribute. Not by group membership, but the actual > >> >> value of a users attribute. Is this possible? > >> >> > >> >> Cheers, > >> >> Dealy > >> > > >> > Yes. Just assign these attributes to the user object in LDAP. > >> > >> I have a value set for an attribute in LDAP, how do I "extract" the > >> value from the attribute and do a comparison on it in the users file > >> so I can set the VLAN? > > > > Hi, > > > > I don't remember exactly what I did on version 1. Please see: > > http://vuksan.com/linux/dot1x/802-1x-LDAP.html > > for some hints. > > > > I had something like > > > > DEFAULT Auth-Type .= LDAP > > Reply-Message = "Auth by LADP" > > > > in my users file. Other attributes stored in an object of objectClass > > radiusprofile should be added automatically to the Reply attributes. > > I don't actually want to add radiusprofile attributes to my LDAP. The > users already have an attribute which identifies their department. I > want to be able to say if "department attribute = X then allocate VLAN > Y". Can this be done without specifically setting the vlan etc as > radiusprofile attributes. Also I am not using ldap for the > authentication, just authorization. The authentication is done using > ntlm_auth.
Then you would habe to re-map some LDAP-attribute of your objectClass to Tunnel-Private-Group-ID. The Tunnel-Type=VLAN and Tunnel-Medium-Type=IEEE-802 could be set in the DEFAULT section of the users file. Please see the ldap.attrmap in your raddb dir for the mapping of attributes. Greetings, -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: mi...@multinet.de web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html