Install samba and winbind. That's the proper way to pass auth to AD. Forget likewise-open.
It works quite well the way that's documented in the wiki. You'll probably waste a lot of time doing it any other way. Mearl > -----Original Message----- > From: freeradius-users- > bounces+jmdanner=samford....@lists.freeradius.org [mailto:freeradius- > users-bounces+jmdanner=samford....@lists.freeradius.org] On Behalf Of > Tomas > Sent: Wednesday, February 18, 2009 6:06 AM > To: FreeRadius users mailing list > Subject: FreeRADIUS and Active Directory > > Dear all, > > I'm trying to setup my FreeRADIUS to verify user credentials from > windows AD (at the moment I'm using users file). I have no experience > in > joining Linux based machine to windows domain, I had a look at few > guides and found that the easiest way is to use "likewise-open". I've > joined my radius server to the domain and noticed that likewise did not > use samba's winbind or ntml_auth. Which according to wiki I've been > reading is a must to enable authentication using AD. > http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWT > O > > Can I install winbind and samba manually, or should I start again and > not use likewise-open at all? > > Thanks for your help! > Tomas > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html