>But the server doesn't send the reply to the client (Timeout at clientside) > >rad_recv: Access-Request packet from host 10.0.1.131:57004, id=7, length=71 >User-Name = "radius" >NAS-IP-Address = 10.0.1.131 >CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a >CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455 >Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 >modcall[authorize]: module "preprocess" returns ok for request 0 >rlm_chap: Setting 'Auth-Type := CHAP' >modcall[authorize]: module "chap" returns ok for request 0 >modcall[authorize]: module "mschap" returns noop for request 0 >rlm_realm: No '@' in User-Name = "radius", looking up realm NULL >rlm_realm: No such realm "NULL" >modcall[authorize]: module "suffix" returns noop for request 0 >rlm_eap: No EAP-Message, not doing EAP >modcall[authorize]: module "eap" returns noop for request 0 >users: Matched entry radius at line 52 >modcall[authorize]: module "files" returns ok for request 0 >perl_pool: item 0xb809a5f0 asigned new request. Handled so far: 1 >found interpetator at address 0xb809a5f0 >rlm_perl: Added pair User-Password = pass >rlm_perl: Added pair Auth-Type = Perl >perl_pool total/active/spare [5/0/5] >Unreserve perl at address 0xb809a5f0 >modcall[authorize]: module "perl" returns ok for request 0 >rlm_pap: WARNING! No "known good" password found for the user. Authentication >may fail because of this. >modcall[authorize]: module "pap" returns noop for request 0 >modcall: leaving group authorize (returns ok) for request 0 >rad_check_password: Found Auth-Type Perl >auth: type "Perl" >Processing the authenticate section of radiusd.conf >modcall: entering group Perl for request 0 >perl_pool: item 0xb8181050 asigned new request. Handled so far: 1 >found interpetator at address 0xb8181050 >rlm_perl: RAD_REQUEST: Client-IP-Address = 10.0.1.131 >rlm_perl: RAD_REQUEST: CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455 >rlm_perl: RAD_REQUEST: CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a >rlm_perl: RAD_REQUEST: User-Name = radius >rlm_perl: RAD_REQUEST: NAS-IP-Address = 10.0.1.131 >rlm_perl: RAD_REPLY: Reply-Message = challenge: >rlm_perl: RAD_REPLY: User-Password = pass >rlm_perl: RAD_REPLY: State = challenge >rlm_perl: Added pair Reply-Message = challenge: >rlm_perl: Added pair User-Password = pass >rlm_perl: Added pair State = challenge >rlm_perl: Added pair Response-Packet-Type = Access-Challenge >rlm_perl: Added pair Auth-Type = Perl >perl_pool total/active/spare [5/0/5] >Unreserve perl at address 0xb8181050 >modcall[authenticate]: module "perl" returns handled for request 0 >modcall: leaving group Perl (returns handled) for request 0 >Finished request 0 >Going to the next request >--- Walking the entire request list --- >Waking up in 6 seconds...
That's an outdated server version. Upgrade. It works in the current version. Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html