If you mean when I type a some command on cisco shell, in the cisco
console already I show you (much more), else you mean a radius server
then I must disappoint you there is a silent, nothing to do!
If you consider for important all debug information on radius when user
login-run some command-log
rad_recv: Access-Request packet from host 192.168.255.10 port 1812,
id=91, length=77
NAS-IP-Address = 192.168.255.10
NAS-Port = 1
NAS-Port-Type = Virtual
User-Name = "userA"
Calling-Station-Id = "192.168.255.116"
User-Password = "passwA"
+- entering group authorize {...}
++[preprocess] returns ok
[suffix] No '@' in User-Name = "userA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[files] users: Matched entry userA at line 7
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
+- entering group PAP {...}
[pap] login attempt with password "passwA"
[pap] Using clear text password "passwA"
[pap] User authenticated successfully
++[pap] returns ok
Login OK: [userA/passwA] (from client csp port 1 cli 192.168.255.116)
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 91 to 192.168.255.10 port 1812
Service-Type = NAS-Prompt-User
Cisco-AVPair = "shell:priv-lvl=1"
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 192.168.255.10 port 1813,
id=92, length=93
NAS-IP-Address = 192.168.255.10
NAS-Port = 1
NAS-Port-Type = Virtual
User-Name = "userA"
Calling-Station-Id = "192.168.255.116"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = NAS-Prompt-User
Acct-Session-Id = "00000108"
Acct-Delay-Time = 0
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 1,Client-IP-Address =
192.168.255.10,NAS-IP-Address = 192.168.255.10,Acct-Session-Id =
"00000108",User-Name = "userA"'
[acct_unique] Acct-Unique-Session-ID = "37c9ff46441cf46b".
++[acct_unique] returns ok
[suffix] No '@' in User-Name = "userA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
+- entering group accounting {...}
[detail] expand:
/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d ->
/var/log/radacct/192.168.255.10/detail-20090307
[detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to
/var/log/radacct/192.168.255.10/detail-20090307
[detail] expand: %t -> Sat Mar 7 02:26:33 2009
++[detail] returns ok
rlm_counter: We only run on Accounting-Stop packets.
++[daily] returns noop
[radutmp] expand: /var/log/radutmp -> /var/log/radutmp
[radutmp] expand: %{User-Name} -> userA
++[radutmp] returns ok
[sradutmp] expand: /var/log/sradutmp -> /var/log/sradutmp
[sradutmp] expand: %{User-Name} -> userA
++[sradutmp] returns ok
[attr_filter.accounting_response] expand: %{User-Name} -> userA
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 92 to 192.168.255.10 port 1813
Finished request 1.
Cleaning up request 1 ID 92 with timestamp +20
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 91 with timestamp +20
Ready to process requests.
rad_recv: Accounting-Request packet from host 192.168.255.10 port 1813,
id=93, length=105
NAS-IP-Address = 192.168.255.10
NAS-Port = 1
NAS-Port-Type = Virtual
User-Name = "userA"
Calling-Station-Id = "192.168.255.116"
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Service-Type = NAS-Prompt-User
Acct-Session-Id = "00000108"
Acct-Terminate-Cause = User-Request
Acct-Session-Time = 14
Acct-Delay-Time = 0
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 1,Client-IP-Address =
192.168.255.10,NAS-IP-Address = 192.168.255.10,Acct-Session-Id =
"00000108",User-Name = "userA"'
[acct_unique] Acct-Unique-Session-ID = "37c9ff46441cf46b".
++[acct_unique] returns ok
[suffix] No '@' in User-Name = "userA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[files] returns noop
+- entering group accounting {...}
[detail] expand:
/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d ->
/var/log/radacct/192.168.255.10/detail-20090307
[detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to
/var/log/radacct/192.168.255.10/detail-20090307
[detail] expand: %t -> Sat Mar 7 02:26:47 2009
++[detail] returns ok
rlm_counter: Packet Unique ID = '37c9ff46441cf46b'
rlm_counter: This Service-Type is not allowed. Returning NOOP.
++[daily] returns noop
[radutmp] expand: /var/log/radutmp -> /var/log/radutmp
[radutmp] expand: %{User-Name} -> userA
++[radutmp] returns ok
[sradutmp] expand: /var/log/sradutmp -> /var/log/sradutmp
[sradutmp] expand: %{User-Name} -> userA
++[sradutmp] returns ok
[attr_filter.accounting_response] expand: %{User-Name} -> userA
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 93 to 192.168.255.10 port 1813
Finished request 2.
Cleaning up request 2 ID 93 with timestamp +34
Going to the next request
Ready to process requests.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
