Here is the debug output with several authentications.
Thanks,
Chris Delcamp
/usr/sbin/freeradius -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = off
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = yes
main: log_auth_badpass = no
main: log_auth_goodpass = yes
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "akira"
sql: port = ""
sql: login = "radius"
sql: password = "xxxxx"
sql: radius_db = "radius"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/var/log/freeradius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op
FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER
BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op
FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER
BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress =
'%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}',
AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets =
'%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}'
AND UserName = '%{SQL-User-Name}' AND NASIPAddress=
'%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId,
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S',
AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}'
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId
= '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress =
'%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S',
'%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM
radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date)
values ('', '%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to rad...@akira:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded detail
detail: detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 10.50.50.104:1645, id=77, length=199
User-Name = "0021709d3d47"
User-Password = "0021709d3d47"
Service-Type = Call-Check
Framed-MTU = 9000
Called-Station-Id = "00-15-F9-03-2C-1E"
Calling-Station-Id = "00-21-70-9D-3D-47"
Message-Authenticator = 0xc198aa97b07bf2f551e3e810f431157c
NAS-Port-Type = Ethernet
NAS-Port = 50230
NAS-Port-Id = "GigabitEthernet2/0/30"
Called-Station-Id = "00-15-F9-03-2C-1E"
Calling-Station-Id = "00-21-70-9D-3D-47"
NAS-IP-Address = 10.50.50.104
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "0021709d3d47", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
radius_xlat: '0021709d3d47'
rlm_sql (sql): sql_set_user escaped user --> '0021709d3d47'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = '0021709d3d47' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = '0021709d3d47' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radreply WHERE Username = '0021709d3d47' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = '0021709d3d47' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
auth: type Local
auth: user supplied User-Password matches local User-Password
Login OK: [0021709d3d47/0021709d3d47] (from client technet port 50230 cli
00-21-70-9D-3D-47)
Sending Access-Accept of id 77 to 10.50.50.104 port 1645
Tunnel-Private-Group-Id:0 = "MEC_IPC_NOC"
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Type:0 = VLAN
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 10.50.50.104:1646, id=114,
length=177
Acct-Session-Id = "0000027B"
User-Name = "0021709d3d47"
Acct-Session-Time = 185694
Acct-Input-Octets = 79506530
Acct-Output-Octets = 509257406
Acct-Input-Packets = 391524
Acct-Output-Packets = 1110089
Acct-Authentic = RADIUS
Acct-Status-Type = Interim-Update
NAS-Port-Type = Ethernet
NAS-Port = 50230
NAS-Port-Id = "GigabitEthernet2/0/30"
Called-Station-Id = "00-15-F9-03-2C-1E"
Calling-Station-Id = "00-21-70-9D-3D-47"
Service-Type = Framed-User
NAS-IP-Address = 10.50.50.104
Acct-Delay-Time = 0
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
modcall[preacct]: module "preprocess" returns noop for request 1
rlm_acct_unique: Hashing 'NAS-Port = 50230,Client-IP-Address =
10.50.50.104,NAS-IP-Address = 10.50.50.104,Acct-Session-Id =
"0000027B",User-Name = "0021709d3d47"'
rlm_acct_unique: Acct-Unique-Session-ID = "b1b375e4c0f1a5e6".
modcall[preacct]: module "acct_unique" returns ok for request 1
rlm_realm: No '@' in User-Name = "0021709d3d47", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 1
modcall[preacct]: module "files" returns noop for request 1
modcall: leaving group preacct (returns ok) for request 1
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat: '/var/log/freeradius/radacct/10.50.50.104/detail-20090326'
rlm_detail: /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/10.50.50.104/detail-20090326
modcall[accounting]: module "detail" returns ok for request 1
modcall[accounting]: module "unix" returns noop for request 1
radius_xlat: '/var/log/freeradius/radutmp'
radius_xlat: '0021709d3d47'
modcall[accounting]: module "radutmp" returns ok for request 1
radius_xlat: '0021709d3d47'
rlm_sql (sql): sql_set_user escaped user --> '0021709d3d47'
radius_xlat: 'UPDATE radacct SET FramedIPAddress = '',
AcctSessionTime = '185694', AcctInputOctets = '79506530',
AcctOutputOctets = '509257406' WHERE AcctSessionId = '0000027B'
AND UserName = '0021709d3d47' AND NASIPAddress= '10.50.50.104''
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql (sql): Released sql socket id: 3
modcall[accounting]: module "sql" returns ok for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 114 to 10.50.50.104 port 1646
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 77 with timestamp 49cbcb7e
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 114 with timestamp 49cbcb7f
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 10.50.50.104:1645, id=78, length=199
User-Name = "001b63933f59"
User-Password = "001b63933f59"
Service-Type = Call-Check
Framed-MTU = 9000
Called-Station-Id = "00-15-F9-03-2C-20"
Calling-Station-Id = "00-1B-63-93-3F-59"
Message-Authenticator = 0x4ca6f19761939b05af9d7e1d33ea54d7
NAS-Port-Type = Ethernet
NAS-Port = 50232
NAS-Port-Id = "GigabitEthernet2/0/32"
Called-Station-Id = "00-15-F9-03-2C-20"
Calling-Station-Id = "00-1B-63-93-3F-59"
NAS-IP-Address = 10.50.50.104
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "001b63933f59", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 2
radius_xlat: '001b63933f59'
rlm_sql (sql): sql_set_user escaped user --> '001b63933f59'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = '001b63933f59' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 2
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = '001b63933f59' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radreply WHERE Username = '001b63933f59' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = '001b63933f59' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): Released sql socket id: 2
modcall[authorize]: module "sql" returns ok for request 2
modcall: leaving group authorize (returns ok) for request 2
auth: type Local
auth: user supplied User-Password matches local User-Password
Login OK: [001b63933f59/001b63933f59] (from client technet port 50232 cli
00-1B-63-93-3F-59)
Sending Access-Accept of id 78 to 10.50.50.104 port 1645
Tunnel-Private-Group-Id:0 = "MEC_IPC_NOC"
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Type:0 = VLAN
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 10.50.50.104:1646, id=115,
length=177
Acct-Session-Id = "000002D5"
User-Name = "001b63933f59"
Acct-Session-Time = 23552
Acct-Input-Octets = 493684924
Acct-Output-Octets = 86317876
Acct-Input-Packets = 491494
Acct-Output-Packets = 309470
Acct-Authentic = RADIUS
Acct-Status-Type = Interim-Update
NAS-Port-Type = Ethernet
NAS-Port = 50232
NAS-Port-Id = "GigabitEthernet2/0/32"
Called-Station-Id = "00-15-F9-03-2C-20"
Calling-Station-Id = "00-1B-63-93-3F-59"
Service-Type = Framed-User
NAS-IP-Address = 10.50.50.104
Acct-Delay-Time = 0
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 3
modcall[preacct]: module "preprocess" returns noop for request 3
rlm_acct_unique: Hashing 'NAS-Port = 50232,Client-IP-Address =
10.50.50.104,NAS-IP-Address = 10.50.50.104,Acct-Session-Id =
"000002D5",User-Name = "001b63933f59"'
rlm_acct_unique: Acct-Unique-Session-ID = "82a1808da95f05e3".
modcall[preacct]: module "acct_unique" returns ok for request 3
rlm_realm: No '@' in User-Name = "001b63933f59", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 3
modcall[preacct]: module "files" returns noop for request 3
modcall: leaving group preacct (returns ok) for request 3
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 3
radius_xlat: '/var/log/freeradius/radacct/10.50.50.104/detail-20090326'
rlm_detail: /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/10.50.50.104/detail-20090326
modcall[accounting]: module "detail" returns ok for request 3
modcall[accounting]: module "unix" returns noop for request 3
radius_xlat: '/var/log/freeradius/radutmp'
radius_xlat: '001b63933f59'
modcall[accounting]: module "radutmp" returns ok for request 3
radius_xlat: '001b63933f59'
rlm_sql (sql): sql_set_user escaped user --> '001b63933f59'
radius_xlat: 'UPDATE radacct SET FramedIPAddress = '',
AcctSessionTime = '23552', AcctInputOctets = '493684924',
AcctOutputOctets = '86317876' WHERE AcctSessionId = '000002D5'
AND UserName = '001b63933f59' AND NASIPAddress= '10.50.50.104''
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
modcall[accounting]: module "sql" returns ok for request 3
modcall: leaving group accounting (returns ok) for request 3
Sending Accounting-Response of id 115 to 10.50.50.104 port 1646
Finished request 3
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 78 with timestamp 49cbcc12
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 3 ID 115 with timestamp 49cbcc13
Nothing to do. Sleeping until we see a request.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
