Hello Ivan Kalik
Thank you very much for your help.
I didn't implement 2 different attribute on the one user by myself. I was
trying to do following
If packet goes to subnet 192.168.0.0/24 then router should use policy-map
512Kbps.
If packet goes to subnet any then router should use policy-map 256Kbps.
Note: policy-map already done on cisco router.
How to define above policy in the FreeRADIUS.
Best regards,
Tseveen.
t...@kalik.net wrote:
I'm trying to implement ADSL service via cisco router by NAS, FreeRADIUS
2.1.3 by AAA server and daloRADIUS.
On the cisco router I defined some policy-map for traffic shape. In the
radgroupreply table contains following attribute with value.
"cisco-avpair", ":= ", "ip:sub-policy-Out=512Kbps"
Question is
How to define 2 difference policy-map on the one user in FreeRADIUS Databse.
example:
"cisco-avpair", ":= ", "ip:sub-policy-Out=512Kbps"
"cisco-avpair", ":= ", "ip:sub-policy-Out=1Mbps"
Use different operator (+=):
http://wiki.freeradius.org/Operators
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
