Eric wrote:
Hi,
My radius server use ldap server for authorize and authentication.I
set an attribute in ldap server that is the check-name in sqlcounter
to limit users Input traffic. I want when user traffic reaches to this
amount the user become stop but radius checks ldap attributes only at
the first of connection not in the middle. How can I set radius server
check users traffic with the amount of this attribute in ldap server
in the duration of connection?
The radius server steps out of the way once authentication and
authorization is complete, nor does it have the ability to disconnect a
user from a NAS. You need to have the NAS disconnect the user itself
when a threshold is reached. This is accomplished by returning a vendor
specific attribute specifying the limit for the session which the NAS
then maintains. Once the limit on the NAS is reached the NAS terminates
the session. You'll have to check your NAS documentation for a traffic
limiting parameter. In the other common case of disconnect after a time
duration it's handled by computing the session length during
authorization and returning attribute 194 with the maximum number of
seconds for the connection. This attribute is understood by comon NAS
devices and is known variously as Ascend-Maximum-Time,
Cisco-Maximum-Time or Lucent-Maximum-Time. You'll need to apply the same
logic for data volume.
--
John Dennis <jden...@redhat.com>
Looking to carve out IT costs?
www.redhat.com/carveoutcosts/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html