Hi all,
Thanks in advance for your help. My scenario is shown below: ________________________________________________________________________ ____ Radius Client --> Radius Proxy Radius Server 192.168.1.2 192.168.1.3 --> IPS1(192.168.1.4) ________________________________________________________________________ ____ I need the following Authentication Statistic of the RADIUS Server (192.168.1.4) AuthRadiusClientAccessRequests Counter32, AuthRadiusClientAccessRetransmissions Counter32, AuthRadiusClientAccessAccepts Counter32, AuthRadiusClientAccessRejects Counter32, AuthRadiusClientAccessChallenges Counter32, AuthRadiusClientMalformedAccessResponses Counter32, AuthRadiusClientBadAuthenticators Counter32, AuthRadiusClientPendingRequests Gauge32, AuthRadiusClientTimeouts Counter32, AuthRadiusClientUnknownTypes Counter32, AuthRadiusClientPacketsDropped Counter32, AuthRadiusClientCounterDiscontinuity TimeTicks Launch the command: echo "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = 1 , FreeRADIUS-Stats-Server-IP-Address = 192.168.1.4 , FreeRADIUS-Stats-Server-Port = 1812" | ./radclient -s 192.168.1.3:1812 status <SHAREDSECRET> Received response ID 59, code 2, length = 140 FreeRADIUS-Total-Access-Requests = 56 FreeRADIUS-Total-Access-Accepts = 0 FreeRADIUS-Total-Access-Rejects = 1 FreeRADIUS-Total-Access-Challenges = 0 FreeRADIUS-Total-Auth-Responses = 0 FreeRADIUS-Total-Auth-Duplicate-Requests = 3 FreeRADIUS-Total-Auth-Malformed-Requests = 0 FreeRADIUS-Total-Auth-Invalid-Requests = 0 FreeRADIUS-Total-Auth-Dropped-Requests = 5 FreeRADIUS-Total-Auth-Unknown-Types = 0 Total approved auths: 1 Total denied auths: 0 Total lost auths: 0 Can I enable other counters for AuthRadiusClientAccessRetransmissions, AuthRadiusClientTimeouts, AuthRadiusClientCounterDiscontinuity)? Or I should use "counter" module of FreeRadius? RadiusClientAccessRetransmissions "The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of edaRadiusServerCounterDiscontinuity." RadiusClientTimeouts "The number of authentication timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of edaRadiusServerCounterDiscontinuity." RadiusClientCounterDiscontinuity "The number of centiseconds since the last discontinuity in the RADIUS Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Client module within the managed entity." Thanks Regards Marco
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html