I did do that, but if i add Auth-Type := Accept, i still want to validate the IP sent in h323-remote-address. Also, i will want to want to run a couple of SQL queries which also determine whether or not the user should be authenticated. Is it possible to get radius to authenticate a user against a custom script?
Thanks > Date: Thu, 11 Jun 2009 00:01:09 +0100 > Subject: Re: Remote IP Authentication > From: t...@kalik.net > To: barnyritch...@technologist.com; freeradius-users@lists.freeradius.org > > > I cant find any info on the Cisco-compatible Remote IP authentication > > method. > > > > I have looked everywhere and cannot see how to authenticate by > > h323-remote-address to freeradius. > > > > > > > > The Radius Request looks like: > > > > > > > > User-Name = '2001' > > Calling-Station-Id = '2001' > > Called-Station-Id = '012356789' > > h323-remote-address = '172.101.91.1 > > > > That's it? No password? > > > > > i want to check against the h323-remote-address. If it is an ip which is > > stored against a username, then the authentication should be successful. > > > > > > > > i am using MySQL and i tried adding this to the radcheck table: > > > > > > > > attribute: h323-remote-address > > > > op: == > > > > value: 172.101.91.1 > > > > That's like mac authentication with no password then. Add Auth-Type := > Accept to radcheck for the same user. > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html