Hi ,
I am useing a free radius version available with redhat 4.5 ,RPM name is freeradius-1.0.1-3.RHEL4.3.i386.rpm I am trying to use ippool configuration configurations i had made is in radiusd.conf file ippool main_pool { # range-start,range-stop: The start and end ip # addresses for the ip pool range-start =10.143.71.15 range-stop =10.143.71.25 # netmask: The network mask used for the ip's netmask = 255.255.255.0 # cache-size: The gdbm cache size for the db # files. Should be equal to the number of ip's # available in the ip pool cache-size = 800 # session-db: The main db file used to allocate ip's to clients session-db = ${raddbdir}/db.ippool # ip-index: Helper db index file used in multilink ip-index = ${raddbdir}/db.ipindex # override: Will this ippool override a Framed-IP-Address already set override = yes # maximum-timeout: If not zero specifies the maximum time in seconds an # entry may be active. Default: 0 maximum-timeout = 0 } accounting { main_pool } post-auth { main_pool } ------------------------------------------------------------------------------------------------------------------------------------------ in users file steve Auth-Type := Local, User-Password == "testing" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 172.16.3.33, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = Broadcast-Listen, Framed-Filter-Id = "std.ppp", Framed-MTU = 1500, Framed-Compression = Van-Jacobsen-TCP-IP DEFAULT Pool-Name := "main_pool" -------------------------------------------------------------------------------------------------------------------------------------------------------------- in clients file <nas ip> <secret key> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- and i am getting errors when i run /usr/sbin/radiusd -A -X modcall: entering group post-auth for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "main_pool" returns noop for request 0 rlm_ippool: Could not find Pool-Name attribute. I am suspecting some problem with users file ... Can you please help me to find out what is missing -- Thanks and regards Jos george. 9844459056
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html