Thanks very much for your answers. In our eap section, we had the following :
copy_request_to_tunnel = no use_tunneled_reply = no Since we change these to : copy_request_to_tunnel = yes use_tunneled_reply = yes The Access-Accept message send VLAN attributes as below : Sending Access-Accept of id 43 to 192.168.100.5 port 5001 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Private-Group-Id:0 = "2" Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Type:0 = VLAN User-Name = "toto" MS-MPPE-Recv-Key = 0x69f0f1c436ccbe11df23099070ca2c3ceb6116c3246344a8d2c78c96a68fa146 MS-MPPE-Send-Key = 0x6aad292ef955ae61e910e51a9ae7d2b903f5e123c48dc4cc0e12f713490d2aa3 EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 Mon Jun 22 16:08:39 2009 : Debug: Finished request 10. Mon Jun 22 16:08:39 2009 : Debug: Going to the next request Mon Jun 22 16:08:39 2009 : Debug: Waking up in 4.0 seconds. Unfortunatly, the switch still not switching the port from VLAN 1 to VLAN 2. Maybe there is other misconfigurations on our switch or another settings in radius configurations ? Any ideas to help please! Best regards. ________________________________ De : "a.l.m.bu...@lboro.ac.uk" <a.l.m.bu...@lboro.ac.uk> À : FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Envoyé le : Lundi, 22 Juin 2009, 11h29mn 47s Objet : Re: Radius+Huwaei switch + auto VLan Assignment issue hi, have you set the copy tunnel = yes for the PEAP section in eap.conf? alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html