Yes, it is the Filter-Id attribute. Sample reply:
rad_recv: Access-Accept packet from host x.x.x.x:1812, id=23, length=79 Filter-Id = "n=BE_Bus_1024Kbps:v=<>:h=OFF:a=<ON,120>:c=OFF" Session-Timeout = 65535 Termination-Action = RADIUS-Request Although for greater security we should have hybrid mode enabled. If you're working with someone using 2.5GHz it should be. I don't believe there is a migration path for 3650 at this point. IP CS is a bit different and may require additional changes to SU config. Ben > -----Original Message----- > From: freeradius-users- > bounces+wiechman.lists=gmail....@lists.freeradius.org > [mailto:freeradius-users- > bounces+wiechman.lists=gmail....@lists.freeradius.org] On Behalf Of > Steve Evans > Sent: Wednesday, July 08, 2009 9:32 PM > To: FreeRadius users mailing list > Subject: Re: Alvarion BreezeMax BTS - Service provisioning? > > Thanks Ben, > Can you just clarify that it is the service is defined using the > Filter-ID attrib? > > Yes the service is for Eth CS although I think it's 16e capable - but > due > to a complete lack of response from Alvarion I do not exactly know! > > On that note I am also trying to find out the RADIUS Attribs for the > IPCS > mode - of which there is absolutely no details of in the Alvarion > manuals! > > Cheers > > Steve > > > On Thu, 09 Jul 2009 09:05:30 +0700, Ben Wiechman > <wiechman.li...@gmail.com> wrote: > > > Remove the trailing semicolon. > > > > The documentation isn't very clear on that point, but the semicolon is > > only > > needed as a separator if you are supplying multiple services to the > BTS. > > It > > should not be included as the trailing character. > > > > The debug output for this was... unhelpful in earlier versions. Not > sure > > if > > they've improved it any. > > > > (Note, the listed service is for Eth CS on a non 16e BTS correct?) > > > > If you need clarification on the ramifications of the different > service > > options let me know. > > > > Ben > > > >> -----Original Message----- > >> From: freeradius-users- > >> bounces+wiechman.lists=gmail....@lists.freeradius.org > >> [mailto:freeradius-users- > >> bounces+wiechman.lists=gmail....@lists.freeradius.org] On Behalf Of > >> Steve Evans > >> Sent: Wednesday, July 08, 2009 4:00 AM > >> To: t...@kalik.net; FreeRadius users mailing list > >> Subject: Re: Alvarion BreezeMax BTS - Service provisioning? > >> > >> Unfortunately not possible - I am doing this on behalf of a customer > who > >> has already had the network installed (albeit poorly) and I am trying > to > >> give them some control over it. > >> > >> I have quick discovered that Alvarion on somewhat how is best to put > it > >> . > >> . unique . . in there Radius approach! > >> > >> There support & documentation is absolutely non existant, they very > >> much > >> strike me as a box shifting company - just get it out and once it's > in > >> forget the customer. > >> > >> So I guess no one has this in and working then?!!? :( > >> > >> > >> > >> On Wed, 08 Jul 2009 15:45:05 +0700, Ivan Kalik <t...@kalik.net> wrote: > >> > >> >> Hopefully someone has come across this before and can easily > >> answer > >> >> the > >> >> question I am attempting to get an Alvarion Breezemax basestation > >> >> working > >> >> with FreeRadius for provisioning of services. > >> > > >> > Best advice you are going to get here is: "avoid Alvarion if > >> possible". > >> > > >> > Ivan Kalik > >> > Kalik Informatika ISP > >> > > >> > - > >> > List info/subscribe/unsubscribe? See > >> > http://www.freeradius.org/list/users.html > >> > >> > >> - > >> List info/subscribe/unsubscribe? See > >> http://www.freeradius.org/list/users.html > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html