Hi, i cheked the debug and the file is correct: Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" }
And i tried without Fall-Through = Yes and same result :-( Im stuck here, any help will be greatly appreciated --- Miguel On Tue, Jul 28, 2009 at 2:27 PM, Ivan Kalik <t...@kalik.net> wrote: > > Hi, i want to accept all request coming from a specific nas-ip-assdress , > > i > > used to configure like this (in users file): > > > > DEFAULT NAS-IP-Address == "192.168.150.25", Auth-Type := Accept > > Fall-Through = Yes > > The above settings are not working now, this is the debug of a > > transaction: > > > > rad_recv: Access-Request packet from host 192.168.150.25 port 1645, > id=52, > > length=94 > > NAS-IP-Address = 192.168.150.25 > > NAS-Port = 108 > > NAS-Port-Type = Async > > User-Name = "123.com.sv" > > Called-Station-Id = "22660321" > > Calling-Station-Id = "22264218" > > User-Password = "cisco" > > Service-Type = Dialout-Framed-User > ... > > ++[files] returns noop > ... > > How sure are you that the users file you are using is the one server is > using? Check the debug of the server startup and see if the users file is > the correct one. If the file is correct, then your syntax isn't (check > that DEFAULT line for typing mistakes). > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html