Hi Ivan
I still get the same error now Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] <<< TLS 1.0 Handshake [length 03b2], Certificate --> verify error:num=20:unable to get local issuer certificate [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert write:fatal:unknown CA TLS_accept:error in SSLv3 read client certificate B rlm_eap: SSL error error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. TLS receive handshake failed during operation [tls] eaptls_process returned 4 [eap] Handler failed in EAP/tls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> devin...@palettemm.com attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 141 to 203.121.4.59 port 6001 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 1 ID 135 with timestamp +120 Cleaning up request 2 ID 136 with timestamp +120 Cleaning up request 3 ID 137 with timestamp +120 Cleaning up request 4 ID 138 with timestamp +120 Cleaning up request 5 ID 139 with timestamp +120 Cleaning up request 6 ID 140 with timestamp +120 Waking up in 1.0 seconds. Cleaning up request 7 ID 141 with timestamp +120 Ready to process requests. 2009/8/4 Devinder Singh <devinbhul...@gmail.com>: > Ok i took your advise and yes its a diffeenrent error now > > Listening on authentication address * port 1812 > Listening on accounting address * port 1813 > Listening on proxy address * port 1814 > Ready to process requests. > rad_recv: Access-Request packet from host 203.121.4.59 port 6001, > id=134, length=181 > User-Name = "devin...@palettemm.com" > NAS-IP-Address = 203.121.4.59 > Called-Station-Id = "00-20-a6-6c-49-9d:palstaff" > Calling-Station-Id = "00-04-23-7b-56-b9" > NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d" > Framed-MTU = 1400 > NAS-Port-Type = Wireless-802.11 > EAP-Message = > 0x0203001b01646576696e6465724070616c657474656d6d2e636f6d > Message-Authenticator = 0xb7f29ed2232abda7b5b24bb131883617 > +- entering group authorize {...} > ++[preprocess] returns ok > ++[chap] returns noop > ++[mschap] returns noop > [suffix] Looking up realm "palettemm.com" for User-Name = > "devin...@palettemm.com" > [suffix] No such realm "palettemm.com" > ++[suffix] returns noop > [eap] EAP packet type response id 3 length 27 > [eap] No EAP Start, assuming it's an on-going EAP conversation > ++[eap] returns updated > ++[unix] returns notfound > [files] users: Matched entry devin...@palettemm.com at line 94 > ++[files] returns ok > ++[expiration] returns noop > ++[logintime] returns noop > [pap] WARNING! No "known good" password found for the user. > Authentication may fail because of this. > ++[pap] returns noop > Found Auth-Type = EAP > +- entering group authenticate {...} > [eap] EAP Identity > [eap] processing type md5 > rlm_eap_md5: Issuing Challenge > ++[eap] returns handled > Sending Access-Challenge of id 134 to 203.121.4.59 port 6001 > EAP-Message = 0x010400160410edd3007f1e599b71120693ed62eaee7c > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0x17b5db9117b1dfd16583cca5ed9db022 > Finished request 0. > Going to the next request > Waking up in 4.9 seconds. > Cleaning up request 0 ID 134 with timestamp +1 > Ready to process requests. > > > > > > 2009/8/4 Devinder Singh <devinbhul...@gmail.com>: >> HI Ivan >> >> Thanks. Yes i have double click on the ca.der file and client.p12 both >> were installed successfuly. >> >> I also manaed to set up my SSID palstaff and when i click on the SSID >> i see a pop up windows on my wireles LAN asking for my username on >> certificate and i selected >> >> devin...@palettemm.com from the combo drop down list and click OK >> >> when i click OK radius reports the following error >> >> TLS Alert write:fatal:unknown CA >> TLS_accept:error in SSLv3 read client certificate B >> rlm_eap: SSL error error:140890B2:SSL >> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned >> SSL: SSL_read failed in a system call (-1), TLS session fails. >> TLS receive handshake failed during operation >> [tls] eaptls_process returned 4 >> [eap] Handler failed in EAP/tls >> [eap] Failed in EAP select >> ++[eap] returns invalid >> Failed to authenticate the user. >> Using Post-Auth-Type Reject >> +- entering group REJECT {...} >> [attr_filter.access_reject] expand: %{User-Name} -> >> devin...@palettemm.com >> attr_filter: Matched entry DEFAULT at line 11 >> ++[attr_filter.access_reject] returns updated >> Delaying reject of request 6 for 1 seconds >> Going to the next request >> Waking up in 0.9 seconds. >> Sending delayed reject for request 6 >> Sending Access-Reject of id 133 to 203.121.4.59 port 6001 >> EAP-Message = 0x040a0004 >> Message-Authenticator = 0x00000000000000000000000000000000 >> Waking up in 3.6 seconds. >> Cleaning up request 0 ID 127 with timestamp +18 >> Cleaning up request 1 ID 128 with timestamp +18 >> Cleaning up request 2 ID 129 with timestamp +18 >> Cleaning up request 3 ID 130 with timestamp +18 >> Cleaning up request 4 ID 131 with timestamp +18 >> Waking up in 0.2 seconds. >> Cleaning up request 5 ID 132 with timestamp +18 >> Waking up in 1.0 seconds. >> Cleaning up request 6 ID 133 with timestamp +19 >> Ready to process requests. >> >> >> >> >> >> >> >> 2009/8/4 Ivan Kalik <t...@kalik.net>: >>>> I mnaged to follow the steps in /etc/raddb/certs/README >>>> >>>> and copied ca.der and client.p12 to XP machine >>> >>> It looks like you have copied them but not installed them in the >>> certificate store. Double-click the certificates and install them first. >>> >>> Ivan Kalik >>> Kalik Informatika ISP >>> >>> >> >> >> >> -- >> Devinder >> > > > > -- > Devinder > -- Devinder - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html