> Quoting "Ivan Kalik" <t...@kalik.net>:
>
>> So what does first ldap section return when user is missling - fail or
>> reject (I see you have access attribute configured there)? If it's
>> reject
>> you need unlang (ie 2.x).
>>
>
> Here is my output of radtest with a user on the second LDAP server.
> This server never gets quieried unless the first one is offline. I
> also made these changes to radiusd.conf after re-reading the
> configurable_failover document.
> I would appreciate some pointers because I am just not getting it.
>
> redundant {
>
> rhds_ldap
> notfound = 1
> ok = return
> ad_ldap
> notfound = 1
> ok = return
> }
>
>
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> modcall: entering group redundant for request 0
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testuser
> radius_xlat: '(uid=testuser)'
> radius_xlat: 'dc=xx,dc=xx,dc=xx'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: attempting LDAP reconnection
> rlm_ldap: (re)connect to xx.xx.com:389, authentication 0
> rlm_ldap: bind as cn=ciscoap,ou=System,dc=xx,dc=xx,dc=xx/xxxx to
> xx.xx.com:389
> rlm_ldap: waiting for bind result ...
> rlm_ldap: Bind was successful
> rlm_ldap: performing search in dc=xx,dc=xx,dc=xx, with filter
> (uid=testuser)
> rlm_ldap: object not found or got ambiguous search result
> rlm_ldap: search failed
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "rhds_ldap" returns notfound for request 0
Ok. You can remove redundant (module is not failing, so no failover
needed). Just list the two modules one below the other.
...
> users: Matched entry DEFAULT at line 216
...
> rad_check_password: Found Auth-Type LDAP
> auth: type "LDAP"
Remove that from users file. Let pap module do the authentication. Ldap
should return the password to radius via ldap.attrmap.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
