>>> have freeradius 2.1, and the configuration of my users file is like the >>> following: >>> >>> ... >>> DEFAULT Auth-Type = LDAP >>> Aruba-User-Vlan = 20, >>> Fall-Through : = 1 >>> .... >>> >>> once I do radiusd -X, I see only the first access-challenge with the >>> Aruba-User-Vlan Attirbute, and no more access-challenges have this >>> attribute. >> >> Any chance we can see that? >> > I do not understand what do you mean .
I mean that nobody is going to look at your wireshark capture. Post freeradius debug. > I have tried to see if radius > client > (radtest) sends the aruba-user-vlan in a access radius reply, like an > access-accept and it works. > But, using WPA2/EAP-PEAP using Aruba controller as a NAS , the radius > sends > inside an access challenge, the aruba-user-vlan VSA attirbute but only in > two of the large amount of access-challenge, as you saw in that pictures, > or > print screen. Erm. No, I haven't. Nor did, I believe, anybody else. If you want help post freeradius debug (as suggested anywhere you care to look - README, FAQ, this list ...) Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html