Alan, Ivan, and others could help me I reinstalled Debian system and installed new version 2.1.7. Allway the same problem.
I think i miss something very basic for you but not for the freeradius beginner I am. That is all what I did : * install last stable debapt-get update apt-get upgrade apt-get install openssh-server apt-get install libcurl4-openssl-dev apt-get install tcpdump apt-get gcc apt-get make* *wget -c ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-2.1.7.tar.gz tar xvzf freeradius-server-2.1.7.tar.gz cd freeradius-server-2.1.7 ./configure;make;make install* add AP1 in clients.conf : *client 192.168.0.250 { secret = lrnp2tlm shortname = AP1 }* add home_server in proxy.conf : *home_server IAS { ipaddr = 192.168.0.252 port = 1812 type = "auth" secret = "lrnp2tlm" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool jack_pool { type = fail-over home_server = IAS } realm jack { auth_pool = jack_pool } * modify eap.conf : *default_eap_type = mschapv2* and in peap function : *peap { default_eap_type = mschapv2 copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } mschapv2 { }* I remove inner-tunnel link in raddb/sites-enabled Create one for proxy-sites-enabled *debian:/usr/local/etc/raddb/sites-enabled# ls -l total 0 lrwxrwxrwx 1 root staff 33 oct 3 20:51 control-socket -> ../sites-available/control-socket lrwxrwxrwx 1 root staff 26 oct 3 20:51 default -> ../sites-available/default lrwxrwxrwx 1 root staff 37 oct 3 21:00 proxy-inner-tunnel -> ../sites-available/proxy-inner-tunnel* comment suffix twice in default file add jack in proxy-inner-tunnel: *server proxy-inner-tunnel { authorize { update control { Proxy-To-Realm := "jack" } } authenticate { eap } post-proxy { eap } } * That's all. Is something wrong or missing ? Thanks 2009/10/3 Ivan Kalik <t...@kalik.net> > > Alan, > > > > I installed first with apt-get an older version, then remove > > /etc/freeradius > > and /etc/raddb and then install the new version 2.1.7 from > freeradius.org. > > > > Jacques > > > > 2009/10/3 Alan DeKok <al...@deployingradius.com> > > > >> Jacques FOUCHER wrote: > >> > but Alan told me too proxying is not made > >> > PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy. > >> > [eap] Tunneled session will be proxied. Not doing EAP. > >> > ++[eap] returns handled > >> > WARNING: Empty section. Using default return values. > >> > ERROR: Failed to create a new socket for proxying requests. > >> > ERROR: Failed inserting request into proxy hash. > >> > ERROR: Failed to proxy request 8 > >> > > >> > Sorry Alan , i don't have any idea. > >> > >> Are you sure you're using 2.1.7, and not some other version? > >> > >> It's a little hard to believe that proxying doesn't work in 2.1.7. It > >> seems to be fine for everyone else... > > Something is badly broken in your installation. You should remove both > versions completely and then do fresh 2.1.7 install. > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > -- Jacques FOUCHER
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html