Hi , Well I am sure the authentication is done by the radius since the user get some of the attributes (like framed ip and egress) that why I used the this list to ask the question. I can even see attributes in the NAS (when turning on debug). What I miss some attributes in the NAS, and I want to see what happen to them in the radius.
Regarding the ERX-IPv6-NdRa-Prefix - I will ask in the Vendor list, 10x, Regards, Ram -----Original Message----- From: freeradius-users-bounces+ram=oasis-tech....@lists.freeradius.org [mailto:freeradius-users-bounces+ram=oasis-tech....@lists.freeradius.org] On Behalf Of Ivan Kalik Sent: ג 06 אוקטובר 2009 10:48 To: FreeRadius users mailing list Subject: Re: implemnting ipv6 with freeradius and juniper ERX > I am trying to implement ipv6 on my network using freeradius and juniper > ERX as NAS. > > So I looked for some documentation and found that In order to assign ipv6 > address to a user using radius I need 2 attribuets. > > Framed-IPv6-Prefix and ERX-IPv6-NdRa-Prefix > > I patched the juniper dictionary as found in Juniper webpage - and added > the > attributes to a user, now there's 2 problems. > > 1. Can someone help me with the format of the ERX-IPv6-NdRa-Prefix > or > where can I read about this? As with all vendor specific attributes best place to look for this information is - the vendor. > 2. When trying to debug this - I run the daemon radius -Xxx and for > some reason I can't see the acess-request process only the accounting. That would mean that authentication is done locally on the NAS - it is not sending those requests to the radius server. Check NAS configuration to see is radius authentication configured (and are radius server details correct). Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html