Hi,
Whenever i use radiusd -X i get the following :
This is a part of radiusd -X
Sending Access-Challenge of id 8 to 127.0.0.1 port 10004
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "2"
Symbol-User-Group = "moto"
Symbol-Downlink-Limit-Kbps = 0
Symbol-Uplink-Limit-Kbps = 0
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x89c2dbc689c0c2620c47c6a69e0623a2
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 10004, id=9, length=306
User-Name = "kach"
Called-Station-Id = "00-15-70-23-F5-34:xtest"
Calling-Station-Id = "00-15-70-37-8D-05"
NAS-Port = 1
NAS-Port-Type = Wireless-802.11
Framed-MTU = 1400
Service-Type = Framed-User
NAS-IP-Address = 127.0.0.1
NAS-Identifier = "RFS4000"
Symbol-Wlan-Index = "xtest"
Symbol-Attr-4 = "1"
NAS-Port-Id = "WLAN1"
Connect-Info = "CONNECT 54Mbps 802.11a"
State = 0x89c2dbc689c0c2620c47c6a69e0623a2
and etc etc...
i did not understand the "waking up in 4.9 sec" ??
Why does it wait for.?
can we remove this?
Thanx & Regards,
Kachin
The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.
http://in.yahoo.com/-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
