easyzonecorp.net wrote: > > you can not do that after Post-Auth-Type REJECT > > you must do after > noresetbytescounter > > read on my arti http://www.easyzonecorp.net/network/view.php?ID=1042 > > Freeradius unlang accept after chap reject. > > > and then apply it. > > i know you can !! >
Thx for advice. It almost helped:) I've rewrited my config to: noresetbytescounter { reject = 1 } if (reject) { update reply { Reply-Message := "You have reached your transfer limit. Limited bandwitch" } update control { Auth-Type := "Accept" WISPr-Bandwidth-Max-Down = 131072 WISPr-Bandwidth-Max-Up = 131072 } } And it works - when user reach transfer limit he gets correct reply message, but he is rejeceted anyway. It looks like "update control" doesn't work. Sending Access-Request of id 142 to xxx.xxx.xxx.xxx port 1812 User-Name = "user01" User-Password = "user01" NAS-IP-Address = 127.0.0.1 NAS-Port = 10 rad_recv: Access-Reject packet from host xxx.xxx.xxx.xxx port 1812, id=142, length=119 Acct-Interim-Interval = 60 Idle-Timeout = 60 WISPr-Bandwidth-Max-Down = 1048576 WISPr-Bandwidth-Max-Up = 262144 Session-Timeout = 360 Reply-Message = "You have reached your transfer limit. Limited bandwitch" Where should I look now? -- View this message in context: http://old.nabble.com/customize-Post-Auth-Type-REJECT-tp27173361p27207343.html Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html